Unit 6 - Energy and Momentum of Rotating Systems

Rotational kinetic energy and the translation-plus-spin split for rolling bodies, rotational work and power, rolling without slipping and why static friction does no work, the incline race decided by shape alone, rolling with slipping, angular momentum of particles and rigid bodies about a stated point, angular impulse, and conservation of angular momentum for skaters, merry-go-rounds, clutches and collisions with pivoted rods.

Subject: AP Physics C: Mechanics · 63 slides · diagram-first lesson

Open the interactive version of this deck

What this lesson covers

The lesson, slide by slide

1. Energy and Momentum of Rotating Systems

Title

AP Physics C: Mechanics — Unit 6

Rotational kinetic energy, rolling, angular momentum and its conservation — the energy and momentum tools, rebuilt for things that turn

2. What this deck buys you

Objectives

The last deck gave you torque and moment of inertia — the rotational versions of force and mass. This deck finishes the job by building the rotational versions of energy and momentum.

Nothing here is new physics. Every result is Newton's second law, integrated over angle or over time, exactly as in the energy and momentum decks. What changes is that the bookkeeping now has to count spin.

The organising idea: a rotating body stores energy and momentum that a ruler on its centre cannot see. A wheel spinning in place has no velocity at its centre and yet has kinetic energy and angular momentum. This deck is about counting that hidden share correctly.

You already own the two most powerful tools in mechanics. The energy deck integrated Newton's second law over position and gave you work and kinetic energy. The momentum deck integrated it over time and gave you impulse and conservation of momentum. The last deck built torque and moment of inertia. This deck plugs those rotational quantities into the energy and momentum machinery.

So expect very little genuinely new physics. Almost every result here is a line you have already written, with mass replaced by moment of inertia, velocity by angular velocity, and force by torque. Keep a running dictionary in your head; by the end of the deck it will have eight entries and you will be able to derive any of them from its linear twin.

What is new is that rotation hides energy and momentum from a naive look. A spinning wheel on a fixed axle has a stationary centre, so ½Mv² for its centre is zero — and yet it takes real work to spin it up and real braking to stop it. A rolling ball shares its energy between moving and spinning, and if you forget the spin your answers come out consistently too fast.

The other new idea is that angular momentum belongs to a reference point. That sounds like a complication, and it is actually the most useful freedom in the unit: choosing the point cleverly makes unknown forces vanish from the problem.

3. Rotational Kinetic Energy

Section

Section 1

4. Kinetic energy of a spinning body, piece by piece

Concept

A wheel spinning on a fixed axle has a stationary centre — and plainly it carries energy, because it takes work to spin it up and a brake gets hot stopping it. Find that energy by adding up the pieces.

Figure (svg): A disc spinning about its centre with three mass elements at increasing radii, each carrying a velocity arrow whose length grows in proportion to its distance from the axis.

Every piece moves at its own speed v = rω; summing ½mv² over the pieces gives ½Iω².

Write the kinetic energy of one small piece.

Why: A piece of mass m_i at distance r_i from the axis moves in a circle at speed v_i = r_i ω — the same ω for every piece, since the body is rigid.

\[ K_i = \tfrac{1}{2}m_i v_i^2 = \tfrac{1}{2}m_i r_i^2 \omega^2 \]

Add the pieces and pull out the common factor.

Why: The angular speed is shared, so it comes outside the sum. What is left inside is exactly the moment of inertia.

\[ K = \tfrac{1}{2}\Big(\sum_i m_i r_i^2\Big)\omega^2 = \tfrac{1}{2}I\omega^2 \]

So rotational kinetic energy is not a new kind of energy. It is ordinary ½mv², summed over pieces that move at different speeds — and I is precisely the bookkeeping device that makes the sum come out in one line.

The derivation here is worth following once properly, because it explains what the moment of inertia actually is rather than leaving it as a table of formulas.

Chop the spinning body into small pieces. Each piece moves in a circle about the axis, and since the body is rigid, every piece sweeps out the same angle in the same time — they all share one angular velocity ω. But they do not share a speed. A piece at radius r moves at v = rω, so pieces far from the axis move fast and pieces near it barely move. The figure shows exactly that: velocity arrows growing in proportion to distance from the axis.

Each piece carries ordinary kinetic energy, ½mv², which becomes ½mr²ω². Add them up. Because ω is the same for every piece, it factors straight out of the sum, and what is left inside the bracket is the sum of mass times radius squared — which is precisely the moment of inertia.

So rotational kinetic energy is not some separate kind of energy with its own rules. It is ordinary translational kinetic energy, summed over pieces moving at different speeds. The moment of inertia is just the bookkeeping that lets you do that sum once, for a given shape, instead of every time. That is also why I weights distance squared: one factor of r comes from the speed, and the speed is squared in the energy.

5. Reading the rotational kinetic energy

Notation

Annotate

On: \( K_{\text{rot}} = \tfrac{1}{2}I\omega^2 \)

  • The moment of inertia about the axis the body is actually turning around. Change the axis and I changes, so the same spinning speed can mean very different energies.
  • Angular speed in radians per second — never revolutions per minute — and squared, so doubling the spin rate quadruples the energy, exactly as doubling v does for translation.
  • The same one half as in ½mv², and for the same reason: it comes from integrating ω dω, just as translational KE comes from integrating v dv.

Read it as a direct translation: m becomes I, v becomes ω. That dictionary will hold for every result in this deck — momentum, work, power — and it is worth trusting.

The units check is reassuring. I is in kg m², ω² is in s⁻², so the product is kg m² s⁻², which is a joule. Radians are dimensionless and quietly drop out.

This formula is short, and each of its three pieces carries a warning.

The moment of inertia must be about the axis the body is really turning about. The same rod spinning about its centre and about its end has moments of inertia differing by a factor of four, so the same angular speed stores four times the energy. When a problem changes the axis, the energy changes with it.

The angular speed must be in radians per second. Revolutions per minute and degrees per second will give you numbers that look plausible and are wrong by large factors. Converting rpm to rad/s means multiplying by 2π and dividing by 60, and it is worth doing as the very first step of any problem that quotes rpm.

And the one half is the same one half that sits in ½mv², for the same reason. Both come from integrating a variable times its own differential: v dv for translation, ω dω for rotation. You will see that integral explicitly when we derive the rotational work-energy theorem a few slides on.

If you remember nothing else, remember the translation: m becomes I, v becomes ω. That rule will not let you down anywhere in this deck.

6. Energy stored in a flywheel

Worked example

A flywheel is a uniform solid disc of mass 50 kg and radius 0.40 m spinning at 300 rad/s (about 2900 rpm). How much energy does it store, and how fast would a 1200 kg car have to go to carry the same energy?

Find the moment of inertia.

Why: A uniform solid disc about its symmetry axis has I = ½MR².

\[ I = \tfrac{1}{2}(50)(0.40)^2 = 4.0\,\text{kg m}^2 \]

Compute the rotational kinetic energy.

Why: Use ω in rad/s, which it already is.

\[ K = \tfrac{1}{2}(4.0)(300)^2 = 1.8\times 10^5\,\text{J} = 180\,\text{kJ} \]

Find the equivalent car speed.

Why: Set ½mv² equal to the same energy and solve for v.

\[ v = \sqrt{\frac{2(1.8\times 10^5)}{1200}} = \sqrt{300} \approx 17\,\text{m/s} \]

Interpret.

Why: A 50 kg disc you could fit under a desk stores the kinetic energy of a family car at 62 km/h. The secret is the ω² — spinning fast pays off quadratically.

This is why flywheels are used for energy storage in buses, Formula 1 cars and grid stabilisation. They store energy as spin and give it back on demand, without chemistry.

This example is chosen to make the size of rotational energy feel real. A solid disc of fifty kilograms and forty centimetres radius is something you could lift with help and fit under a desk. Spinning at three hundred radians per second — under three thousand rpm, slower than many car engines — it stores one hundred and eighty kilojoules.

To put that in perspective, the example converts it to a car. A twelve hundred kilogram car would need to be travelling at about seventeen metres per second, roughly sixty-two kilometres an hour, to carry the same kinetic energy. That is a lot of energy to keep in a small spinning disc.

The reason is the ω squared. Angular speed can be made very large without anything moving dangerously far, because the disc stays in place. Doubling the spin rate quadruples the stored energy. Modern composite flywheels spin at tens of thousands of rpm inside vacuum enclosures for exactly this reason.

Notice the routine you used, because it is the routine for every rotational energy problem: find I from the shape, make sure ω is in rad/s, then apply ½Iω². The only place this can go wrong is the moment of inertia formula, so it is worth double-checking which shape and which axis you have before multiplying anything.

7. A spinning disc has the kinetic energy of its rim speed

Trap

The trap

Every point on the rim moves at v = Rω. So the disc's kinetic energy should be ½Mv² with v the rim speed — a familiar formula, a familiar speed.

\[ K \overset{?}{=} \tfrac{1}{2}M(R\omega)^2 = \tfrac{1}{2}MR^2\omega^2 \]

The fix

That treats all the mass as if it sat on the rim. For a solid disc, most of it does not.

\[ K = \tfrac{1}{2}\Big(\tfrac{1}{2}MR^2\Big)\omega^2 = \tfrac{1}{4}MR^2\omega^2 \]

Mass near the axis moves slowly and contributes little. The correct answer for a solid disc is half the rim-speed guess. For the flywheel just computed, the rim-speed version would claim 360 kJ — double the real 180 kJ.

bodyItrue K as a fraction of ½MR²ω²
thin hoop (all mass at the rim)MR²1 — the rim guess is exactly right
solid disc½MR²½
solid sphere⅖MR²⅖

So the rim-speed shortcut works for exactly one shape — the hoop — and overestimates for everything else. Always go through I.

This trap is attractive because it uses a correct fact — the rim does move at Rω — and a correct formula, ½Mv². The mistake is in combining them, because doing so quietly assumes every bit of the disc moves at the rim speed.

In a solid disc, most of the mass is nowhere near the rim. A large fraction sits close to the axis, moving slowly and contributing very little energy. When you do the sum honestly, through the moment of inertia, the solid disc stores exactly half of what the rim-speed guess predicts.

The table makes the pattern clear. For a hoop, every bit of mass genuinely is at the rim, so the rim-speed guess happens to be exactly right. For a solid disc the true energy is half the guess, and for a solid sphere it is two fifths. The more the mass is concentrated towards the axis, the worse the guess becomes.

So the fix is a habit rather than a formula: never shortcut through a speed. Always go through the moment of inertia, which is precisely the device that accounts for the different speeds of different pieces. If a calculation of yours for a solid object came out with ½MR²ω², that is the signal to stop and check.

8. A rolling body has two kinds of kinetic energy

Concept

A wheel rolling along the road is doing two things at once: its centre is translating, and it is spinning about that centre. Its kinetic energy is the sum of the two.

Figure (svg): Three wheels side by side. The first shows pure translation with equal velocity arrows at top, centre and bottom. The second shows pure rotation with the top arrow forward and the bottom arrow backward. The third, their sum, shows the top moving at twice the centre speed and the bottom at rest.

Rolling is translation of the centre plus rotation about it; at the contact point the two cancel.

\[ K = \underbrace{\tfrac{1}{2}Mv_{\text{cm}}^2}_{\text{translation}} + \underbrace{\tfrac{1}{2}I_{\text{cm}}\omega^2}_{\text{spin about the centre}} \]

This split works for any moving rigid body, rolling or not, provided the rotational term uses the moment of inertia about the centre of mass. That restriction is not a convention — the cross terms cancel only about the centre of mass.

For rolling without slipping, v_cm = Rω ties the two terms together, and the whole thing collapses to a single expression in v.

\[ K = \tfrac{1}{2}Mv^2 + \tfrac{1}{2}\beta MR^2 \frac{v^2}{R^2} = \tfrac{1}{2}Mv^2(1 + \beta), \qquad \beta = \frac{I_{\text{cm}}}{MR^2} \]

A rolling wheel is doing two things at once, and the figure separates them. In the first panel the whole wheel slides forward without turning: every point moves at the same velocity v. In the second it spins in place: the top moves forward at Rω, the bottom moves backward at Rω, and the centre is still. Add the two motions point by point and you get the third panel, which is rolling.

Look at what the sum does. At the top, the forward translation and the forward spin add, giving 2v. At the bottom, the forward translation and the backward spin cancel exactly — provided v equals Rω — leaving the contact point momentarily at rest. That cancellation is what rolling without slipping means.

The kinetic energy splits the same way: a translational part for the centre of mass and a rotational part for the spin about the centre of mass. This split is true for any rigid body moving in any way, with one condition that matters. The rotational term must use the moment of inertia about the centre of mass. About any other point, extra cross terms appear and the tidy split fails.

For rolling without slipping, the constraint v = Rω lets you write everything in terms of v. The result, ½Mv² times one plus β, is the single most useful expression in this deck. The number β, the ratio I over MR², is a pure number set by the shape alone, and it measures how much extra energy the spin adds on top of the translation.

9. Rolling is pure rotation about the contact point

Picture it

There is a second, equally valid way to see the same motion — and it makes the velocity of every point on the wheel obvious at a glance.

Figure (svg): A rolling wheel with dashed lines from the contact point to several rim points. Each rim point carries a velocity arrow perpendicular to its dashed line, with length proportional to its distance from the contact point: twice the centre speed at the top, zero at the bottom.

At each instant the wheel pivots about its contact point P, so speed grows with distance from P.

At each instant the contact point P is not moving, so the wheel is momentarily pivoting about P. Every point moves perpendicular to its line from P, at a speed proportional to its distance from P.

Then the energy is just rotation about P, and the parallel-axis theorem turns it into the two-term split from the last slide:

\[ K = \tfrac{1}{2}I_P\omega^2 = \tfrac{1}{2}(I_{\text{cm}} + MR^2)\omega^2 = \tfrac{1}{2}I_{\text{cm}}\omega^2 + \tfrac{1}{2}Mv_{\text{cm}}^2 \]

Two pictures, one answer. Use whichever makes the problem shorter — and the contact-point picture is the one that tells you why the bottom of a tyre leaves no skid mark.

Here is a second, equally correct way to picture rolling, and many students find it the more intuitive of the two.

At any instant, the contact point is not moving. So, for that instant, the wheel is behaving exactly as if it were pivoted at the contact point. Every point on the wheel then moves at right angles to the line joining it to the contact point, with speed equal to its distance from the contact point times ω. The figure draws exactly that: the top, twice as far from P as the centre, moves twice as fast; the points level with the centre, at distance R√2 from P, move at √2 times v, diagonally.

Calculating the energy this way is a one-liner: kinetic energy is ½I_P ω², with I_P the moment of inertia about the contact point. The parallel-axis theorem says I_P is I_cm plus MR², and expanding gives exactly the two-term split from the previous slide. Two pictures, one answer — as there must be.

Which picture should you use? The translation-plus-spin picture is better for energy and dynamics because the centre of mass is a natural point. The contact-point picture is better when you want the velocity of a particular point on the wheel. It explains at a glance why a tyre leaves no skid mark when rolling — the rubber touching the road is not sliding — and why the top of a bicycle wheel's spokes look blurred in photographs while the bottom ones look sharp.

10. How much of a rolling disc's energy is spin?

Prediction

Predict first

A uniform solid disc rolls without slipping along a level floor. What fraction of its total kinetic energy is rotational?

  • One quarter
  • One third
  • One half
  • Two thirds

Correct: One third

Why: For a solid disc beta is one half. The translational part is ½Mv² and the rotational part is ½(½MR²)(v/R)² = ¼Mv². So the total is ¾Mv², and the rotational share is ¼ divided by ¾, which is one third. In general the rotational fraction is beta divided by one plus beta.

\[ \frac{K_{\text{rot}}}{K_{\text{total}}} = \frac{\beta}{1 + \beta} \]

The tempting answer is one half — the two motions feel equally important. They are not: the spin share depends entirely on how the mass is distributed, through β, and only a hoop splits its energy evenly.

The intuitive answer is one half, on the feeling that a rolling body is doing two things equally. The calculation says otherwise.

For a solid disc, the translational part is ½Mv². The rotational part is ½ times ½MR² times v²/R², which simplifies to ¼Mv². The total is ¾Mv², and the rotational share is one quarter out of three quarters: one third.

The general formula is β divided by one plus β. Plug in β for any shape and you get its rotational share. For a hoop, β is one and the share is one half — the only shape that does split its energy evenly. For a solid sphere, β is two fifths and the share is two sevenths.

Why care about the fraction? Because this is the energy that is unavailable for making the object move along. When a solid sphere rolls down a ramp, two sevenths of the gravitational energy it gains goes into spin, which is why it arrives slower than a sliding block. The fraction you just computed is directly the reason rolling objects lose races to sliding ones.

11. Splitting the kinetic energy by shape

Comparison

Comparison matrix

rolling bodyβ = I/MR²total Krotational share
thin hoop or ring1Mv²1/2
thin spherical shell2/3(5/6)Mv²2/5
solid disc or cylinder1/2(3/4)Mv²1/3
solid sphere2/5(7/10)Mv²2/7
block sliding without friction0(1/2)Mv²0

Read down the last column. The more the mass is concentrated near the axis, the smaller β, and the less of the energy is locked up in spin. That single number, β, is going to decide every rolling race in this deck.

Every entry comes from one formula — total K is ½Mv²(1 + β) and the spin share is β/(1 + β) — so if you remember the four moments of inertia you can rebuild the whole table in a minute.

This matrix collects the results for the shapes you will meet. Fill in the blanks yourself before looking — each takes a single line from the general formulas.

The structure is one formula applied five times. The total kinetic energy is ½Mv² times one plus β. The rotational share is β divided by one plus β. Everything in the table follows from those two expressions and the moment of inertia of each shape.

The pattern to take away is in the last column. The hoop, with all its mass at the rim, locks half its energy in spin. The solid sphere, with its mass gathered towards the centre, locks only two sevenths. The block, sliding without rotating, locks none at all.

That ordering is about to decide every rolling race in this deck. When objects roll down the same slope from the same height, the one with the smallest β has the most energy left over for moving forward, and it wins. You will see shortly that mass and radius both cancel out completely — the outcome depends on β, a number fixed purely by shape.

12. Rotational Work and Power

Section

Section 2

13. A torque does work through an angle

Concept

Figure (svg): A wheel on a fixed axle with a tangential force applied at the rim. As the wheel turns through a small angle d-theta, the point of application moves along an arc of length R d-theta.

A tangential force acting through an arc ds = R dθ does work F R dθ = τ dθ.

Write the work done by a tangential force over a small arc.

Why: The force is along the motion, so the work is simply force times arc length.

\[ dW = F_t\,ds = F_t\,(R\,d\theta) = \tau\,d\theta \]

Integrate over the whole rotation.

Why: Just as linear work integrates force over displacement, rotational work integrates torque over angle.

\[ W = \int_{\theta_i}^{\theta_f} \tau\,d\theta \qquad \big(= \tau\,\Delta\theta \text{ for constant torque}\big) \]

Only the tangential part of a force does rotational work, for the same reason only the tangential part makes torque. A force aimed straight at the axle turns nothing and does no work.

Work was force times displacement along the force. The figure shows a force applied tangentially at the rim of a wheel. As the wheel turns through a small angle dθ, the point where the force is applied moves along an arc of length R dθ. So the work done is the force times that arc length.

Now regroup: F times R is the torque. So the small piece of work is torque times the small angle, and the total work is the integral of torque over the angle turned through. When the torque is constant, that integral is just torque times the total angle — the rotational version of force times distance.

Only the tangential part of a force does rotational work. A force pointing straight at the axle has no torque, and it also does no work on the rotation, because its point of application moves at right angles to it. These two facts are really one fact viewed twice.

Keep the angle in radians. The derivation used arc length equals R dθ, which is only true in radians. In any other unit the work comes out wrong by a constant factor, and nothing in the arithmetic will warn you.

14. The rotational work-energy theorem

Concept

Start from the rotational second law.

Why: The net torque about a fixed axis equals I times α.

\[ \tau_{\text{net}} = I\frac{d\omega}{dt} = I\frac{d\omega}{d\theta}\frac{d\theta}{dt} = I\omega\frac{d\omega}{d\theta} \]

Multiply by dθ and integrate.

Why: The chain-rule step is the same one that turned F = ma into the linear work-energy theorem in the energy deck.

\[ \int \tau_{\text{net}}\,d\theta = \int_{\omega_i}^{\omega_f} I\omega\,d\omega = \tfrac{1}{2}I\omega_f^2 - \tfrac{1}{2}I\omega_i^2 \]

\[ W_{\text{net}} = \Delta K_{\text{rot}} \]

Same structure, same proof, new symbols. The net work done by all the torques equals the change in rotational kinetic energy — and the one half appears, as promised, from integrating ω dω.

For a body that both translates and rotates, the full theorem is the sum: net work by forces through displacements plus net work by torques through angles equals the change in total kinetic energy. In practice you rarely split it — you write conservation of energy with both kinetic terms and let the forces take care of themselves.

This derivation is the rotational copy of the one in the energy deck, and following it side by side with that one is the best way to see that rotation is not new physics.

Start from τ = Iα, and write α as dω/dt. The trick is the chain rule: dω/dt equals dω/dθ times dθ/dt, and dθ/dt is ω. So the torque equals Iω times dω/dθ. Multiply both sides by dθ and the differentials line up: torque times dθ on the left, Iω dω on the right. Integrate, and the left becomes the work while the right becomes the change in ½Iω².

That ω dω integral is the source of the one half, just as v dv was for translation. Nothing is being assumed or remembered — the formula ½Iω² is produced by the derivation.

In practice, you will rarely write this theorem in its pure rotational form. Most real problems involve bodies that both translate and rotate, and the cleanest approach is to write conservation of energy with both kinetic terms and let gravity's potential energy carry the work. But knowing the theorem tells you why that works, and it handles the cases — a motor applying a known torque — where there is no potential energy to lean on.

15. Rotational power is torque times angular velocity

Concept

Differentiate the work with respect to time.

Why: Power is the rate of doing work, and dθ/dt is ω.

\[ P = \frac{dW}{dt} = \tau\frac{d\theta}{dt} = \tau\omega \]

The linear version was P = Fv. Again: force becomes torque, velocity becomes angular velocity.

Apply it to an engine.

Why: A car engine delivers 300 N m of torque at 5000 rpm. Convert the rotation rate to rad/s before multiplying.

\[ \omega = 5000 \times \frac{2\pi}{60} = 524\,\text{rad/s} \qquad P = (300)(524) \approx 1.57\times 10^5\,\text{W} = 157\,\text{kW} \]

This is why engine brochures quote both a torque figure and a power figure, at different rpm. Torque is how hard the engine twists; power is how fast it does work, and that needs speed as well as twist. A gearbox trades one for the other at (nearly) constant power.

Power is how fast work is being done. Differentiate the rotational work with respect to time, and dθ/dt becomes ω: power is torque times angular velocity. The linear version was force times velocity, and the substitution is exactly the one you expect.

The engine example is worth doing carefully because of the units. The rotation rate is given in rpm, and the formula needs radians per second. Five thousand revolutions per minute is five thousand times two π radians per sixty seconds, about 524 rad/s. Multiply by 300 newton-metres and you get about 157 kilowatts — a sensible figure for a mid-sized petrol engine.

This also explains something about how engines are described. Torque is how hard the crankshaft twists; power is how quickly that twisting does work. An engine can produce large torque at low rpm and still deliver little power, because it is turning slowly. A gearbox exploits this: at nearly constant power, it trades angular speed for torque, so low gear gives the wheels a large torque at low speed, and high gear gives a small torque at high speed.

On the exam, P = τω turns up whenever a motor drives something at constant angular speed. If the speed is constant, the net torque is zero, so the motor's torque exactly matches the friction or load torque — and the motor's power output is that torque times ω.

16. Spinning up a wheel with a torque that fades

Worked example

A wheel with moment of inertia 0.50 kg m² starts from rest. A motor applies a torque τ(θ) = 20 − 2θ newton-metres, which falls to zero once the wheel has turned through 10 rad. How fast is the wheel turning then?

Recognise that the torque depends on angle, not time.

Why: That makes this a work problem, not a τ = Iα integration in time. Work integrates naturally over θ.

Integrate the torque over the angle.

Why: This is the work the motor does — the area under the torque-angle graph.

\[ W = \int_0^{10}(20 - 2\theta)\,d\theta = \Big[20\theta - \theta^2\Big]_0^{10} = 200 - 100 = 100\,\text{J} \]

Convert work into angular speed.

Why: All of the work becomes rotational kinetic energy, since the wheel started from rest.

\[ \tfrac{1}{2}(0.50)\omega^2 = 100 \;\Rightarrow\; \omega = \sqrt{400} = 20\,\text{rad/s} \]

Check with the geometry of the graph.

Why: The torque-angle graph is a triangle with base 10 rad and height 20 N m, so its area is ½ × 10 × 20 = 100 J. Consistent.

The rule of thumb carries straight over from the energy deck: when a force depends on position, use work; when it depends on time, use impulse. The same holds for torque, angle and angular impulse.

The key observation is in the first step. The torque is given as a function of angle, not of time. That is the signal to use work rather than Newton's second law in time.

If you tried τ = Iα, you would get α as a function of θ, and then you would need to integrate a second-order differential equation to find ω. It can be done, but it is the long way round. The work-energy theorem does the integral over angle for you: integrate the torque over the angle, and the result is the change in kinetic energy directly.

The integral itself is straightforward: twenty θ minus θ squared, from zero to ten, gives two hundred minus one hundred, which is one hundred joules. Since the wheel started at rest, all of it becomes ½Iω², and with I equal to one half, ω squared is four hundred, so ω is twenty radians per second.

The check with the triangle is worth making a habit of. A linearly falling torque makes a triangular torque-angle graph, and the area of a triangle is half base times height. Any time a force or torque varies linearly, you can do the integral geometrically in your head, and it is a fast way to catch an arithmetic slip.

17. A falling mass unwinds a heavy pulley

Worked example

A 2.0 kg block hangs from a light string wrapped around a uniform solid-disc pulley of mass 4.0 kg and radius 0.10 m on a frictionless axle. Released from rest, how fast is the block moving after it has fallen 1.5 m?

Figure (svg): A solid disc pulley on a fixed axle with a string wrapped around it, a block hanging from the string, and the drop height marked.

Gravity's work on the block is shared between the block's motion and the pulley's spin.

Write conservation of energy for block plus pulley.

Why: Gravity is the only force doing net work. The string's tension does positive work on the pulley and equal negative work on the block, so it moves energy without creating any.

\[ mgh = \tfrac{1}{2}mv^2 + \tfrac{1}{2}\Big(\tfrac{1}{2}MR^2\Big)\Big(\frac{v}{R}\Big)^2 = \tfrac{1}{2}\Big(m + \tfrac{M}{2}\Big)v^2 \]

Solve for v.

Why: The radius cancels — a solid-disc pulley behaves as if half its mass were added to the moving block.

\[ v = \sqrt{\frac{2mgh}{m + M/2}} = \sqrt{\frac{2(2.0)(9.8)(1.5)}{2.0 + 2.0}} = \sqrt{14.7} = 3.8\,\text{m/s} \]

Compare with free fall.

Why: Without the pulley the block would reach √(2gh) = 5.4 m/s. The difference is the energy now stored as spin, which here is ½ × 2.0 kg's worth out of 4.0 — exactly half.

The ‘effective mass’ idea — M/2 for a disc, M for a hoop — is worth having as a sanity check, but always derive it from the energy equation rather than quoting it.

This is the most common rotational energy problem on the exam, and it repays doing carefully once.

Take the system to be the block and the pulley together, and look for forces that do net work. Gravity on the block does. The axle force does not, because the axle does not move. The tension is the subtle one: it does positive work on the pulley rim and exactly equal negative work on the block, because both ends of the string move at the same speed. So tension transfers energy from block to pulley without creating or destroying any, and you can leave it out of the energy equation entirely.

That leaves gravity's mgh turning into two kinetic energies: the block's ½mv², and the pulley's ½Iω². The string does not slip, so the rim moves at the same speed as the block, which gives ω = v/R. Substituting, the radius cancels completely, and the pulley behaves like an extra mass of M/2 being dragged along with the block.

The numbers give 3.8 metres per second, compared with 5.4 for free fall. The block is slower because half of gravity's work went into spinning the pulley — here the pulley's effective mass, two kilograms, equals the block's mass, so the energy splits evenly.

The effective-mass shortcut is handy for checking, but derive it each time. A hoop pulley would add its whole mass, a solid sphere two fifths of it, and a pulley that is not a uniform disc could be anything.

18. Sweep the pulley's mass

Tweak it

Parameter explorer

Hold the hanging block at 2.0 kg and the drop at 1.5 m. Sweep the mass M of the solid-disc pulley. How does the block's final speed respond — and does it ever reach zero?

\[ v(1.5\,\text{m}) = \sqrt{\frac{58.8}{2 + {M}/2}}\,\text{m/s} \]

  • M — from 0 to 20

Try the extremes first. With the pulley massless, the block's speed after a metre and a half is 5.42 metres per second — exactly free fall, because none of gravity's work is diverted into spin. That is the familiar ‘massless pulley’ of the forces deck, and now you can see what the word massless was quietly doing.

Now make the pulley heavy. The speed falls, but it never reaches zero. However massive the pulley, gravity still does mgh of work on the block, and that energy has to go somewhere; the block always gets a share. For a very heavy pulley the speed falls off roughly as one over the square root of M.

The plotted curve is the block's speed against how far it has fallen. It is a square-root curve for every choice of M, because the acceleration is constant: the energy grows linearly with distance, so the speed grows as its square root. Changing M only changes how steep the curve is.

A useful thought: what does that constant acceleration equal? Rearranging the energy result, a = mg divided by m plus M/2. That is Newton's second law for an effective total mass of m plus M/2 being pulled by a force mg — a nice cross-check between the energy and force methods.

19. Rolling Without Slipping

Section

Section 3

20. The rolling constraint: v = Rω

Concept

Figure (svg): A wheel shown at two positions a distance apart along the ground. The arc of the rim that touched the ground is highlighted and laid out flat along the road, showing that the distance travelled equals the arc length R times theta.

Rolling without slipping lays the rim onto the road: the distance moved equals the arc length unrolled.

If the wheel does not slip, every centimetre of rim that touches the road is laid down on the road once. So the distance the centre moves equals the arc length that has unrolled.

\[ x_{\text{cm}} = R\theta \quad\Longrightarrow\quad v_{\text{cm}} = R\omega \quad\Longrightarrow\quad a_{\text{cm}} = R\alpha \]

The three come together — differentiate once for velocity, twice for acceleration. These are constraints, not laws of nature. They hold only when the contact point does not slide, and the whole of section 4 is about what happens when they fail.

Equivalently: the contact point's velocity is v_cm − Rω, and rolling without slipping means exactly that this is zero.

The figure gives the cleanest way to see the constraint. Imagine the rim wet with paint. As the wheel rolls without slipping, each bit of rim touches the road exactly once and leaves a mark. The painted stripe on the road has exactly the length of rim that has rolled over it. So the distance the centre moves equals the arc length Rθ.

Differentiate that once with respect to time and you get v_cm = Rω. Differentiate again and you get a_cm = Rα. These three statements come as a package, and they are the link that lets you replace an angular quantity with a linear one in every rolling problem.

It is important to understand that this is a constraint, not a law of physics. It is true because of a condition — the contact point not sliding — and only for as long as that condition holds. A wheel spinning on ice has a large ω and almost no v. A locked wheel skidding has a large v and zero ω. In both cases the constraint is simply false.

The cleanest way to state the condition is through the contact point's velocity. The bottom of the wheel moves at v_cm minus Rω: forward with the centre, backward with the spin. Rolling without slipping means exactly that this difference is zero. You will use that expression again in section 4, where it is not zero, and its sign tells you which way friction acts.

21. Static friction does no work on a rolling body

Concept

Figure (svg): A wheel rolling down a slope, with the static friction force drawn at the contact point pointing up the slope and the contact point labelled as instantaneously at rest.

Static friction acts at a point that is momentarily stationary, so it transfers no energy.

Friction is what makes the wheel spin as it goes down the slope — without it the wheel would just slide. And yet it does no work.

\[ P_{\text{friction}} = \vec{f}\cdot\vec{v}_{\text{contact}} = \vec{f}\cdot\vec{0} = 0 \]

Work needs a force acting on a point that moves. The point of the wheel that friction acts on is, at that instant, at rest — and a new point takes its place the next instant, also at rest. So friction never pushes anything through a distance.

What friction does instead is redistribute energy. It slows the translation and speeds up the spin by exactly matching amounts, so the total mechanical energy is conserved. That is why a rolling problem can be solved with mgh = K_trans + K_rot even though friction is essential to the motion.

This is the slide that makes rolling problems solvable by energy, so it deserves careful attention.

Friction is essential to rolling. Without it a ball placed on a slope would slide down without turning, like a block on ice. Friction at the contact point is what provides the torque that spins it up. So there is definitely a force acting.

And yet it does no work. The power delivered by a force is the force dotted with the velocity of the point it acts on. Static friction acts on the contact point, and the contact point is momentarily at rest. Force times zero velocity is zero power. An instant later, a different point is in contact — also momentarily at rest. So at no instant does friction push anything through a distance.

What friction does instead is redistribute energy. Its force slows the translation of the centre, and its torque speeds up the spin. The two effects transfer energy from one form to the other in exactly matching amounts. The total kinetic energy is unchanged by friction; only the split between translation and spin is affected.

The practical consequence is enormous. You may write mgh = ½Mv² + ½Iω² for a ball rolling down a rough ramp, with no friction term at all, even though friction is the reason it rolls.

22. Friction on a rolling ball wastes energy

Trap

The trap

Friction always turns kinetic energy into heat. A ball rolling down a rough ramp has friction acting on it the whole way down, so it must arrive at the bottom with less energy than it started with.

Some students then double-dip: they include the rotational kinetic energy and subtract a friction-work term.

The fix

Static friction on a body rolling without slipping does zero work. No energy is lost; the friction only diverts some of it from translation into spin.

\[ Mgh = \tfrac{1}{2}Mv^2 + \tfrac{1}{2}I_{\text{cm}}\omega^2 \qquad \text{(no friction term)} \]

The ball does arrive slower than a frictionless sliding block — but not because energy was destroyed. The same total energy is shared between two kinds of motion, and only one of them shows up as speed.

situationfriction typeenergy dissipated?
rolling without slippingstatic, at a stationary pointno
skidding, sliding, wheel spinkinetic, at a sliding pointyes
rolling on a soft surfacerolling resistance (deformation)yes, but small, and ignored in AP problems

The distinction is never ‘is there friction?’ but ‘does the contact point slide?’ Sliding dissipates; rolling does not.

The wrong idea here comes from a rule that is usually right: friction turns kinetic energy into heat. That rule is true for kinetic friction, where surfaces slide past each other and rub. It is not true for static friction on a rolling body, because nothing slides.

The rolling ball does arrive at the bottom slower than a frictionless sliding block, and that is what makes the trap convincing. But the reason is not that energy was lost. Both objects have exactly mgh of kinetic energy at the bottom. The ball has shared it between moving and spinning, and only the moving part shows up as speed.

The second version of the trap is double counting. Students sometimes include the rotational kinetic energy and also subtract a friction-work term, punishing the ball twice for the same thing. The rotational term is how friction's effect enters the energy equation. Do not add another.

The table gives the honest rule. Rolling without slipping: no dissipation. Skidding, sliding or wheelspin: kinetic friction, real dissipation. Rolling on a soft surface: a small loss from deformation, which AP problems ignore unless they mention it. The question to ask is never ‘is there friction?’ but ‘does the contact point slide?’

23. Speed of a sphere at the bottom of a ramp

Worked example

A uniform solid sphere is released from rest and rolls without slipping down a ramp, dropping a vertical height of 2.0 m. Find its speed at the bottom, and compare with a block sliding down a frictionless ramp of the same height.

Figure (svg): A solid sphere at the top of a ramp, with the vertical drop h marked between its starting height and the bottom.

Released from rest, the sphere converts mgh into translation and spin.

Write energy conservation with both kinetic terms.

Why: Static friction does no work, so mechanical energy is conserved.

\[ Mgh = \tfrac{1}{2}Mv^2(1 + \beta), \qquad \beta_{\text{sphere}} = \tfrac{2}{5} \]

Solve for v in general, then substitute.

Why: Mass and radius both cancel — a pattern worth noticing.

\[ v = \sqrt{\frac{2gh}{1 + \beta}} = \sqrt{\frac{2(9.8)(2.0)}{1.4}} = \sqrt{28} = 5.3\,\text{m/s} \]

Compare with frictionless sliding.

Why: A block has no spin, so β = 0.

\[ v_{\text{block}} = \sqrt{2gh} = \sqrt{39.2} = 6.3\,\text{m/s} \]

The sphere is slower because 2/7 of its kinetic energy is tied up in spin. Both objects have exactly the same total kinetic energy at the bottom: Mgh.

This is the standard rolling energy problem, and the routine is short: conservation of energy with both kinetic terms, then the constraint to eliminate ω.

Write mgh on one side and ½Mv² times one plus β on the other. Notice what cancels. The mass appears in every term and divides out. The radius was already absorbed into β. The answer depends only on g, h, and the shape through β. For a solid sphere dropping two metres, that gives 5.3 metres per second.

The comparison with the frictionless block is the physical point. The block reaches 6.3 metres per second — faster — because it puts all of mgh into forward motion. The sphere diverts two sevenths into spin. Both end with exactly the same total kinetic energy; they just spend it differently.

A useful habit is to check your answer against the frictionless value. A rolling object must always be slower than √(2gh), and by a factor of one over √(1 + β). If you ever get a rolling speed faster than the sliding speed, something is wrong — usually a moment of inertia used about the wrong axis, or a constraint written upside down.

24. The incline race

Prediction

Figure (svg): Four objects lined up at the top of the same ramp: a sliding frictionless block, a solid sphere, a solid disc and a thin hoop, all to be released from rest at the same height.

Same height, same slope, released together. Mass and radius are all different.

Predict first

A frictionless sliding block, a solid sphere, a solid disc and a thin hoop are released together from the top of the same ramp. The rolling objects have different masses and radii. In what order do they reach the bottom?

  • Heaviest first, whatever its shape
  • Block, sphere, disc, hoop
  • Hoop, disc, sphere, block
  • All four arrive together

Correct: Block, sphere, disc, hoop

Why: Each object's acceleration down the slope is g sin(theta) divided by (1 + beta), which depends only on shape, not on mass or radius. Smaller beta means less energy diverted into spin and a larger acceleration: block (0), sphere (2/5), disc (1/2), hoop (1). The hoop, with all its mass at the rim, always loses.

Mass and size are red herrings. A marble beats a bowling ball rolling beside it only by air resistance; a tin can of soup beats an empty tin of the same size every time, because the empty tin is closer to a hoop.

This is one of the most famous demonstrations in mechanics, and most people's intuition gets it wrong in one of two ways.

The first wrong intuition is that heavier objects win. They do not. Mass cancels completely from every rolling result. A lead ball and a wooden ball of the same shape roll down a slope at exactly the same rate — just as, in free fall, a heavy and a light object fall together.

The second is that larger objects win, or lose. They do not either. Radius is absorbed into β, which depends only on shape. A huge hoop and a tiny ring arrive at the same time.

What does decide the race is β. The block, with β of zero, puts nothing into spin and wins. The solid sphere, β two fifths, comes second. The solid disc, β one half, third. The hoop, β of one, last. The more mass is out at the rim, the more of gravity's energy has to go into spinning it, and the less is left for moving forward.

A memorable version: roll a full tin of soup and an empty tin of the same size down a ramp. The empty tin, with all its mass in the walls, is nearly a hoop, and it loses. The full tin's liquid barely rotates, making it behave almost like a sliding block, and it wins comfortably.

25. Why the race ignores mass and radius

Concept

Differentiate the energy result, or apply forces and torques — either way the acceleration of a rolling body down an incline is

\[ a = \frac{g\sin\theta}{1 + \beta}, \qquad \beta = \frac{I_{\text{cm}}}{MR^2} \]

M and R appear only in the ratio β, which is a pure number fixed by shape. A large hoop and a small hoop, a lead disc and a wooden one, all have the same β for their shape and so the same acceleration.

objectβa / (g sin θ)finishing place
frictionless block011st
solid sphere2/55/7 ≈ 0.712nd
solid disc / cylinder1/22/3 ≈ 0.673rd
thin spherical shell2/33/5 = 0.604th
thin hoop11/2last

This is the gravitational version of the effective-mass idea: β tells you how much ‘extra inertia’ the spin adds, as a fraction of the real mass. The same mass is being pulled; more of it has to be spun up.

This slide gives the formula behind the race. The acceleration of a rolling body down an incline is g sin θ divided by one plus β. You can get it by differentiating the energy result with respect to time, or from forces and torques as on the next slide.

The formula makes the earlier claims precise. Mass and radius appear only through β, and β is a pure number fixed by shape. So two objects of the same shape — whatever their mass, whatever their size — accelerate identically.

The table puts numbers on the race. The block has the full g sin θ. The sphere gets about seventy-one percent of it. The disc gets two thirds, the shell sixty percent, and the hoop exactly half. Since all start from rest and travel the same distance, the time to the bottom goes as one over the square root of the acceleration, so these accelerations fully determine the finishing order.

The effective-mass idea from the pulley returns in a new guise. Gravity pulls on the real mass M, but the body behaves as if it had inertia M times one plus β, because the spin has to be supplied as well. More effective inertia for the same pull means less acceleration.

26. Rolling down an incline by forces and torques

Worked example

A uniform solid disc of mass 2.0 kg rolls without slipping down a 30° incline. Find its acceleration, the friction force, and the smallest coefficient of static friction that allows it to roll.

Figure (svg): Free-body diagram of a disc on an incline: weight straight down from the centre, normal force perpendicular to the slope from the contact point, and static friction up the slope at the contact point.

Only friction has a torque about the centre; it is what makes the disc spin.

Newton's second law along the slope, down positive.

Why: Gravity's component pulls down the slope; friction holds it back.

\[ Mg\sin\theta - f = Ma \]

Torque about the centre.

Why: Gravity and the normal force both act through or towards the centre and have no torque about it. Only friction does, with lever arm R. Use the rolling constraint α = a/R.

\[ fR = I\alpha = \tfrac{1}{2}MR^2\frac{a}{R} \;\Rightarrow\; f = \tfrac{1}{2}Ma \]

Combine and solve.

Why: Substitute f into the first equation.

\[ Mg\sin\theta = \tfrac{3}{2}Ma \;\Rightarrow\; a = \tfrac{2}{3}g\sin\theta = 3.27\,\text{m/s}^2, \quad f = \tfrac{1}{3}Mg\sin\theta = 3.27\,\text{N} \]

Find the minimum coefficient of static friction.

Why: Rolling requires f ≤ μ_s N, with N = Mg cos θ.

\[ \mu_s \ge \frac{f}{N} = \frac{\tfrac{1}{3}Mg\sin\theta}{Mg\cos\theta} = \tfrac{1}{3}\tan 30^\circ = 0.19 \]

The force method gives the friction; the energy method cannot. Use energy when you want a speed, forces and torques when you want a force or an acceleration.

The energy method gave the speed beautifully, but it cannot give the friction force, because friction does no work and so never appears in the energy equation. To find a force, you need Newton's laws.

Two equations do the job. Along the slope, gravity's component pulls the disc down and friction holds it back, giving Mg sin θ minus f equals Ma. For rotation, take torques about the centre. Gravity acts at the centre and has no torque about it. The normal force points straight at the centre and has no torque either. Only friction, acting at the contact point a distance R away, produces a torque, and it is fR.

That second equation is worth pausing on. It says friction is the only thing making the disc spin. Without it there would be no angular acceleration — the disc would slide.

Tie the two together with the constraint α = a/R and solve. The acceleration comes out as two thirds of g sin θ, agreeing with the general formula for β equal to one half. The friction comes out as one third of Mg sin θ, about 3.3 newtons for this disc.

The last step asks how grippy the surface must be. Static friction can supply at most μ_s times the normal force, so rolling requires the needed friction to be at or below that limit. That gives a minimum μ_s of a third of tan θ, about 0.19 on a thirty-degree slope. Every rolling problem has this hidden condition, and the next slide pushes it to the point where it fails.

27. Push the incline steeper until the disc skids

Edge cases

Parameter explorer

A solid disc rolls down an incline with μ_s = 0.40. Sweep the angle. The friction needed for rolling grows with the angle — at what angle does it exceed what the surface can supply?

\[ \mu_{\text{needed}} = \tfrac{1}{3}\tan({theta}^\circ) \]

  • theta — from 0 to 80

Discussion prompt

Explain in two sentences why the required friction grows with the angle, even though the normal force shrinks.

Move the slider and watch the needed coefficient climb. At gentle angles almost no friction is required; the curve rises slowly at first and then steeply, because it follows tan θ.

The question is where it crosses the surface's real limit, here μ_s equal to 0.40. A third of tan θ reaches 0.40 when tan θ is 1.2, at about fifty degrees. Below that, the disc rolls cleanly. Above it, the surface simply cannot provide enough friction to spin the disc up as fast as gravity accelerates it, and the contact point begins to slide.

The two opposing trends are worth seeing clearly, which is what the written question asks for. The friction needed is a third of Mg sin θ, which grows as the slope steepens. The friction available is μ_s Mg cos θ, which shrinks as the slope steepens, because the normal force shrinks. One rising curve and one falling curve must cross somewhere, and that crossing is the slip angle.

Once slipping begins, the whole rolling toolkit is lost at once: the constraint v = Rω fails, friction becomes kinetic with a fixed size, and energy starts being dissipated. Section 4 deals with that regime.

28. The rolling-energy recipe

Pattern

  1. Confirm the contact point does not slide. If the problem says ‘rolls without slipping’, you may use v = Rω and treat friction as doing no work.
  2. Write energy conservation with both kinetic terms: ½Mv² for the centre and ½I_cm ω² for the spin.
  3. Use the constraint to eliminate ω, so the kinetic energy becomes ½Mv²(1 + β).
  4. Solve for v. Expect mass and radius to cancel for a body on its own.
  5. If you need a force or acceleration, switch to Newton's law for the centre plus the torque equation about the centre, tied together by a = Rα.
  6. Check the friction you needed against μ_s N. If it is too large, the body slips and you must start again with kinetic friction.

\[ Mgh = \tfrac{1}{2}Mv^2(1 + \beta) \qquad v = \sqrt{\frac{2gh}{1 + \beta}} \]

Step one is the one students skip. The no-work argument and the constraint come as a package and both rely on no sliding; if the question describes a skid, a launch with backspin, or a slippery surface, neither is available.

This recipe is the condensed version of everything in sections 1 to 3. Use it as a checklist on every rolling problem until the steps are automatic.

The first step is the one that students most often skip, and it is the one that makes the rest legal. Both of the tools you are about to use — the constraint v = Rω and the claim that friction does no work — depend on the contact point not sliding. If a problem mentions skidding, a launch with spin, or an icy surface, stop: neither tool is available.

Steps two to four are the energy calculation. Write energy conservation with two kinetic terms, eliminate ω with the constraint, and solve. You should expect mass and radius to cancel. If they do not, check whether there is a second object, like a hanging block, that breaks the symmetry.

Step five is the switch to forces and torques. Energy gives speeds; it cannot give forces. When you need the friction, the acceleration, or the tension, write Newton's law for the centre and the torque equation about the centre, and tie them together with a = Rα.

And step six closes the loop: check that the friction you needed is actually available. If it is not, the body slips, and you must start again.

29. Which rolls higher up the ramp?

Check

A solid sphere and a thin spherical shell of the same mass and radius roll without slipping along a floor at the same speed. Each meets an identical ramp and rolls up it.

Check your understanding

Which rises higher before stopping?

  • A. The solid sphere, because it has less rotational inertia
  • B. The shell, because it carries more kinetic energy at the same speed (correct)
  • C. They rise to the same height, since mass, radius and speed are equal
  • D. Neither rises at all, because static friction stops them

Answer: B

Why: At the same speed the shell's total kinetic energy is ½Mv²(1 + 2/3), larger than the sphere's ½Mv²(1 + 2/5). All of it converts to gravitational potential energy at the top, so h = v²(1 + β)/2g is larger for the shell. Its extra spin energy is extra fuel for climbing.

Why A tempts people
Less rotational inertia means less stored energy at a given speed, which means the sphere stops sooner — the opposite of what this option claims.
Why C tempts people
Equal speeds do not mean equal kinetic energies once rotation is included. The spin share depends on beta, which differs between the two shapes.
Why D tempts people
Static friction on a body rolling without slipping does no work and stops nothing; gravity is what brings each one to rest.

30. Rolling With Slipping

Section

Section 4

31. When the wheel skids, there are two separate equations

Concept

If the contact point slides, v ≠ Rω and you lose the constraint. In exchange you gain a known friction force: kinetic friction, fixed at μ_k N, pointing against the sliding of the contact point — not necessarily against the motion of the body.

Translation of the centre
M a = (net force). Kinetic friction appears here, with its sign set by which way the contact point slides.
Rotation about the centre
I_cm α = (net torque about the centre). The same friction, acting at radius R, appears here too.
The end of the skid
The two equations evolve v and ω independently until v = Rω. At that instant friction switches to static, and pure rolling begins.

\[ v_{\text{contact}} = v_{\text{cm}} - R\omega \qquad \begin{cases} > 0 & \text{contact slides forward: friction acts backward} \\ < 0 & \text{contact slides backward: friction acts forward} \end{cases} \]

A bowling ball thrown without spin has v > Rω — the contact point skids forward — so friction acts backward, slowing the ball and spinning it up. A car wheel spinning on ice at launch has Rω > v, so friction acts forward and pushes the car along. Same rule, opposite signs.

When the contact point slides, you lose the rolling constraint. That sounds like a loss, but you gain something in exchange: the friction force is now kinetic, so its size is known — μ_k times the normal force — instead of being whatever it needs to be.

So you write two independent equations. Newton's law for the centre of mass, with kinetic friction as one of the forces. And the torque equation about the centre, with the same friction acting at radius R. The two equations evolve v and ω separately, and they will not, in general, satisfy v = Rω.

The direction of the friction is the subtle part, and the expression on the slide settles it. Friction opposes the sliding of the contact point, not the motion of the body. The contact point moves at v minus Rω. If that is positive — the body moving faster than its spin can account for — the bottom slides forward, so friction acts backward. If it is negative — the wheel spinning faster than it is moving — the bottom slides backward, so friction acts forward.

The two examples on the slide show both signs. A bowling ball thrown without spin skids forward, and friction both slows it and spins it up. A car's driven wheel spinning on ice at launch slides backward against the road, and friction pushes the car forward. Either way, the process ends when v reaches Rω: the contact point stops sliding, friction becomes static, and clean rolling takes over.

32. The bowling ball: when does it start to roll?

Worked example

A bowling ball (a uniform solid sphere) is released along the lane at 7.0 m/s with no spin. The coefficient of kinetic friction is 0.20. How long does it skid, and how fast is it moving when it starts rolling cleanly?

Figure (svg): Graph of the ball's centre speed falling linearly and its rim speed R omega rising linearly from zero, meeting at about one second, after which both stay constant at five metres per second.

Friction drags the centre speed down and the spin speed up until they meet.

Translation: friction acts backward, since the contact point skids forward.

Why: The normal force is Mg, so the friction is μ_k Mg and the deceleration is μ_k g.

\[ v(t) = v_0 - \mu_k g t = 7.0 - 1.96\,t \]

Rotation: the same friction, at radius R, spins the ball up.

Why: For a solid sphere I = (2/5)MR², and the mass cancels.

\[ \alpha = \frac{\mu_k M g R}{\tfrac{2}{5}MR^2} = \frac{5\mu_k g}{2R} \;\Rightarrow\; R\omega(t) = \tfrac{5}{2}\mu_k g t = 4.9\,t \]

Find when the skid ends: v = Rω.

Why: Set the two equal; the radius never needed a value.

\[ 7.0 - 1.96\,t = 4.9\,t \;\Rightarrow\; t = \frac{7.0}{6.86} = 1.02\,\text{s}, \qquad v = 4.9(1.02) = 5.0\,\text{m/s} \]

Notice the clean ratio.

Why: In general t = 2v₀/(7μ_k g) and the final speed is (5/7)v₀ — independent of μ_k. A grippier lane ends the skid sooner but at the same final speed.

The distance skidded is v₀t − ½μ_k g t² = 7.14 − 1.02 ≈ 6.1 m, a realistic fraction of an 18 m lane — which is why a bowler's ball visibly ‘catches’ part of the way down.

This is the standard slipping problem, and the graph tells the whole story. The centre speed starts at seven and falls in a straight line, because kinetic friction is constant and decelerates the ball uniformly. The rim speed Rω starts at zero and rises in a straight line, because the same friction exerts a constant torque. Where the two lines meet, the contact point stops sliding and the ball rolls.

Work through the two equations. The translation equation gives a deceleration of μ_k g, which is 1.96 m/s² here. The rotation equation, with the solid-sphere moment of inertia, gives Rα equal to five halves of μ_k g, which is 4.9 m/s². Notice that the mass and the radius both cancel — you never needed either value.

Setting v equal to Rω gives the time, just over one second, and the speed at that moment, five metres per second. The general result is that the final speed is always five sevenths of the launch speed, whatever the friction coefficient. A grippier lane makes the transition happen sooner and closer to the bowler, but the ball always ends up at the same speed.

That independence from μ_k is suspicious in a good way. When a result does not depend on a quantity that was used to derive it, there is usually a conservation law hiding underneath. Hold onto that thought — section 6 reveals it.

33. Where did the bowling ball's energy go?

Anomaly

The ball ends up rolling at five sevenths of its launch speed. But now it is spinning too, and spin carries energy. Is any energy actually missing?

Predict first

What fraction of the bowling ball's initial kinetic energy is still kinetic energy once it is rolling without slipping at (5/7)v₀?

  • All of it
  • 5/7
  • 25/49
  • 2/7

Correct: 5/7

Why: Final kinetic energy is ½M(5v₀/7)² times (1 + 2/5) = ½Mv₀² × (25/49)(7/5) = (5/7)½Mv₀². So 5/7 survives and 2/7 has been dissipated as heat by kinetic friction during the skid. 25/49 is only the translational part, forgetting the spin.

\[ K_f = \tfrac{1}{2}M\Big(\tfrac{5}{7}v_0\Big)^2\Big(1 + \tfrac{2}{5}\Big) = \tfrac{5}{7}\cdot\tfrac{1}{2}Mv_0^2 \]

So yes: two sevenths of the energy is gone, turned to heat at the sliding contact. This is the contrast with the last section made concrete — kinetic friction at a sliding point dissipates, static friction at a rolling point does not.

And notice what the problem never needed: μ_k cancelled from the final speed. A hidden conservation law is at work, and section 6 will name it.

This anomaly asks you to audit the energy. The ball started at v₀ with no spin. It ended at five sevenths of v₀ but spinning. Is the spin energy enough to make up for the lost speed?

It is not. Compute the final energy honestly: ½M times twenty-five forty-ninths of v₀ squared, multiplied by one plus two fifths for the spin. The product of twenty-five forty-ninths and seven fifths is five sevenths. So five sevenths of the original energy survives and two sevenths has gone.

The distractor 25/49 is worth noticing, because it is exactly what you get if you forget the rotational energy and compare only the translational parts. It overstates the loss. Spin energy is real energy, and it must be counted.

So where did two sevenths of the energy go? Into heat, at the sliding contact. For the whole first second the bottom of the ball was rubbing along the lane, and kinetic friction at a sliding contact dissipates energy just as it does for a block skidding to a stop. This is the precise contrast with section 3. Static friction at a rolling contact does no work. Kinetic friction at a sliding contact does negative work, and that work is the missing energy.

34. Rolling cleanly or slipping?

Discrimination

For each situation, decide whether the contact point is sliding — and therefore whether friction is dissipating energy.

Sort into buckets

Rolling without slipping — no energy lost
a car tyre cruising at steady speed on a dry road; a solid cylinder rolling down a gentle rough ramp; a billiard ball well after its skid has ended
Slipping — kinetic friction dissipates
a car skidding with its brakes locked; a bowling ball in the first metre after release; a drag racer's rear wheels smoking at the start; a disc on a 60° slope with μ_s = 0.40
roll
In each of these the contact point is momentarily at rest, so v = Rω holds and friction, if any, is static and does no work. The cylinder on the gentle ramp needs only a little friction; the steady car tyre needs essentially none.
slip
In each of these the contact point slides — forward for a locked wheel or an unspun bowling ball, backward for a spinning drag-racer wheel — so friction is kinetic and turns kinetic energy into heat. The disc on the steep slope belongs here because the friction it needs, a third of tan 60° or about 0.58, exceeds the 0.40 available.

This sort uses one test for every item: is the contact point sliding over the surface or not?

The steady car tyre, the cylinder on a gentle rough ramp and the billiard ball after its skid all have contact points momentarily at rest. Whatever friction acts on them is static, and it does no work. Energy is conserved, apart from small effects like air resistance and rolling resistance that these problems ignore.

The locked wheel, the freshly released bowling ball and the drag racer's spinning tyres all have sliding contact points. In the first two the bottom slides forward; in the drag racer it slides backward. The direction differs, but in every case friction is kinetic and turns kinetic energy into heat — and in the drag racer's case, into smoke.

The disc on the sixty-degree slope is the item that requires a calculation rather than a picture. To roll, it would need a friction coefficient of a third of tan sixty degrees, about 0.58. The surface only offers 0.40, so it cannot roll cleanly and must slip. A situation that looks like rolling can be slipping if the numbers do not allow otherwise.

35. Angular Momentum

Section

Section 5

36. Angular momentum of a particle: L = r × p

Concept

Figure (svg): A particle moving in a straight line that passes above a reference point O. The position vector from O to the particle, the momentum vector, and the perpendicular distance from O to the line of motion are drawn.

Only the perpendicular distance from O to the line of motion matters.

\[ \vec{L} = \vec{r}\times\vec{p}, \qquad L = rp\sin\phi = mv\,r_{\perp} \]

Angular momentum is defined about a point, and changing the point changes the answer. The magnitude is the momentum times the perpendicular distance from the point to the line the particle is moving along — the same lever-arm idea that defined torque.

The direction comes from the right-hand rule and, in a flat problem, is simply ‘counter-clockwise’ (out of the page) or ‘clockwise’ (into the page). Pick one as positive and every angular momentum gets a sign, just as every velocity did in one-dimensional collisions.

Angular momentum is defined for a particle as the cross product of its position and its momentum: r × p. The magnitude is r times p times the sine of the angle between them.

The figure shows the most useful way to evaluate that. Draw the line along which the particle is moving and drop a perpendicular from the reference point O to that line. The length of that perpendicular, r⊥, equals r sin φ. So the angular momentum is just the momentum times that perpendicular distance — the same lever-arm idea you used for torque, where torque was force times the perpendicular distance to its line of action.

The most important thing on this slide is the phrase ‘about a point’. Angular momentum is not a property of the particle alone. It depends on where you stand to measure it. Move O and r⊥ changes, so L changes too.

For flat problems the direction is simple. The cross product points out of the page for counter-clockwise motion about O and into the page for clockwise motion. Choose one sense as positive, exactly as you chose a positive direction for velocities in one-dimensional collisions, and every angular momentum becomes a signed number.

37. Reading L = r × p

Notation

Annotate

On: \( \vec{L}_O = \vec{r}\times m\vec{v} \)

  • Angular momentum belongs to a choice of origin. Always state it — ‘about the pivot’, ‘about the centre’, ‘about the contact point’. An answer without a reference point is not an answer.
  • The position of the particle measured FROM that point. Moving the origin changes r, and hence L.
  • Picks out only the part of the motion that swings around O. Motion directly towards or away from O contributes nothing, exactly as a force aimed at the axle produces no torque.
  • Ordinary linear momentum. Angular momentum is not a new property of the particle — it is its linear momentum, viewed from a point.

Units: kg m²/s, which you can also write as J s. The same units come from Iω, as they must.

The subscript O is the annotation to take most seriously. An angular momentum without a reference point is like a velocity without a frame — a number with no meaning. In written solutions, always say what point you are taking it about: the pivot, the centre, the axle, a point on the floor.

The position vector r is measured from that point to the particle. That is why changing the reference point changes the answer: it changes r, and therefore the cross product.

The cross product picks out only the sideways part of the motion — the part that swings around O. A particle moving straight towards or away from O has r and p parallel, so the cross product is zero. That mirrors torque exactly: a force aimed at the axle produces no torque.

And m v is just the ordinary momentum. Angular momentum is not a new property that particles carry in addition to their momentum. It is their linear momentum, viewed from a particular point, weighted by how far off-centre it passes. That way of thinking will make the next slide unsurprising.

38. A particle moving in a straight line has angular momentum

Counterexample

Claim: angular momentum is about rotation, so a particle travelling in a perfectly straight line at constant speed has none.

Discussion prompt

Refute the claim. Find the angular momentum of the straight-line particle about a point O at perpendicular distance d from its path, and show whether it changes as the particle moves.

This counterexample attacks a natural but wrong idea: that angular momentum is about things that are turning. A particle coasting in a straight line is obviously not turning, so surely it has no angular momentum.

Measure it about a point O off to the side, at perpendicular distance d from the line of motion. The magnitude is momentum times perpendicular distance, which is m v d. That is not zero.

Better still, it does not change as the particle moves. Far away, r is long but the angle between r and p is small. Close by, r is shorter but the angle is closer to ninety degrees. The product r sin φ is always exactly d. The angular momentum is constant, which is exactly what conservation requires for a particle with no force on it and therefore no torque about any point.

The one exception is a reference point on the line of motion, where d is zero and so is L. So the claim is true only about special points, and false in general.

This matters very practically. When a ball of putty flies towards a pivoted rod, it is not rotating at all, but about the pivot it carries angular momentum m v times its perpendicular distance from the pivot. That angular momentum is what sets the rod spinning, and you will calculate it later in this deck.

39. Angular momentum about three different points

Worked example

A 2.0 kg particle moves in the +x direction at 3.0 m/s along the line y = 4.0 m. Find its angular momentum about (a) the origin, (b) the point (0, 4.0 m), (c) the point (0, 10 m). Take counter-clockwise as positive.

Figure (svg): A horizontal line of motion at y equals four metres with a particle moving to the right, and three reference points: the origin below the line, a point on the line, and a point above the line.

Same particle, same instant — three different angular momenta.

About the origin.

Why: Momentum is 6.0 kg m/s and the perpendicular distance is 4.0 m. A particle passing above O and moving right swings clockwise around O, so the sign is negative.

\[ L_a = -(6.0)(4.0) = -24\,\text{kg m}^2/\text{s} \]

About a point on the line of motion.

Why: The perpendicular distance is zero.

\[ L_b = 0 \]

About a point 6.0 m above the line.

Why: Now the particle passes below the reference point moving right, which is counter-clockwise about it.

\[ L_c = +(6.0)(6.0) = +36\,\text{kg m}^2/\text{s} \]

Three valid, different answers for one particle at one instant. This is why every angular-momentum statement needs its reference point — and why, in a problem, you choose the point that makes the unknown forces drop out, just as you chose the system for linear momentum.

This example makes the dependence on the reference point unavoidable by computing three different answers for the same particle at the same instant.

About the origin, the particle passes four metres above and moves to the right. Picture standing at the origin and watching it go: your gaze has to turn clockwise to follow it. Clockwise is negative by the convention chosen, so L is minus six times four, minus twenty-four.

About a point on the line of motion, the perpendicular distance is zero, and so is the angular momentum. The particle is coming straight at that point or going straight away from it, with no swing around it at all.

About a point six metres above the line, the particle passes underneath, moving right, and following it requires turning counter-clockwise. So L is plus six times six, thirty-six.

None of these answers is wrong. They are three correct statements about three different reference points. In a problem, you exploit this freedom: choose the point that makes the forces you do not know drop out, because a force through your chosen point has zero torque about it. That is the rotational version of choosing the system so that unknown forces are internal.

40. For a rigid body on a fixed axis, L = Iω

Concept

Add up the particles.

Why: Every piece of a rigid body rotating about a fixed axis moves in a circle, perpendicular to its radius, at v = rω.

\[ L = \sum_i m_i r_i (r_i\omega) = \Big(\sum_i m_i r_i^2\Big)\omega = I\omega \]

The same dictionary again: p = mv becomes L = Iω. The moment of inertia appears for the same reason it did in the kinetic energy — it is the sum that weights each piece by how far it is from the axis.

For a body that rotates and translates, the angular momentum about a fixed point O splits into two parts, mirroring the kinetic energy split:

\[ \vec{L}_O = \underbrace{\vec{r}_{\text{cm}}\times M\vec{v}_{\text{cm}}}_{\text{orbital: the centre moving}} + \underbrace{I_{\text{cm}}\vec{\omega}}_{\text{spin about the centre}} \]

Earth is the textbook example — an orbital part from going round the Sun and a spin part from turning on its axis. The rolling bowling ball, seen from a point on the lane, is a less glamorous one, and it will matter shortly.

Useful identity — K = L²/(2I). For a fixed L, a smaller moment of inertia means more kinetic energy — the rotational twin of K = p²/2m.

For a rigid body turning about a fixed axis, add up the angular momenta of all its pieces. Each piece moves in a circle about the axis, so its velocity is perpendicular to its radius, and its angular momentum is m times r times rω, or m r² ω. Summing, ω factors out and the moment of inertia appears again. L equals Iω.

This is the rotational twin of p = mv, and the moment of inertia appears for the same reason it did in the kinetic energy: both sums weight each piece by its distance from the axis squared.

For a body that is translating and rotating at once, there is a split very like the kinetic energy split. The angular momentum about a fixed point equals an orbital part — the whole mass moving with the centre of mass — plus a spin part about the centre of mass. Earth orbiting the Sun while turning on its axis is the classic example of both parts at once.

Finally, notice the identity K = L²/2I. It is the rotational version of K = p²/2m, and it will be the quickest way to compare energies in every conservation problem in the next section. When L is fixed, a smaller moment of inertia means a larger kinetic energy — which is precisely what happens to a spinning skater.

41. Torque is the rate of change of angular momentum

Concept

Differentiate L = r × p for a particle.

Why: Use the product rule on the cross product.

\[ \frac{d\vec{L}}{dt} = \frac{d\vec{r}}{dt}\times\vec{p} + \vec{r}\times\frac{d\vec{p}}{dt} = \vec{v}\times m\vec{v} + \vec{r}\times\vec{F} \]

The first term vanishes.

Why: Any vector crossed with itself — or with a multiple of itself — is zero.

\[ \vec{\tau}_{\text{net}} = \frac{d\vec{L}}{dt} \]

This is the rotational version of F = dp/dt, and it is more general than τ = Iα in exactly the same way: it still works when the moment of inertia changes, which is the whole of the next section.

Integrate over time to get the angular impulse.

Why: Just as impulse is the time integral of force, angular impulse is the time integral of torque.

\[ \int_{t_i}^{t_f} \vec{\tau}\,dt = \Delta\vec{L} \]

This derivation shows that τ = dL/dt is not a separate postulate. It follows from Newton's second law in two lines.

Differentiate r × p using the product rule. The first term is the velocity crossed with the momentum. But momentum is just mass times velocity, so this is a vector crossed with a multiple of itself, which is always zero. The second term is r crossed with the rate of change of momentum, which is r × F — the torque.

So the net torque equals the rate of change of angular momentum. Compare it with τ = Iα. That version needs a fixed moment of inertia. This version does not, in exactly the way F = dp/dt works for variable mass while F = ma does not. Skaters, divers and collapsing stars change their moments of inertia, and this is the form that handles them.

Integrate both sides over time and you get the angular impulse: the time integral of torque equals the change in angular momentum. This is the rotational version of impulse equals change in momentum, and it is what you use whenever a torque acts for a known time — braking, a tug on a rope wound round a drum, a brief kick to a pivoted door.

42. Angular impulse: braking a spinning wheel

Worked example

A wheel with I = 0.80 kg m² spins at 40 rad/s. A brake pad presses on the rim at radius 0.30 m with a constant friction force of 25 N. How long does the wheel take to stop, and through how many revolutions does it turn?

Figure (svg): A spinning wheel with a brake pad pressing on its rim and the friction force drawn tangent to the rim opposing the rotation.

The friction force's torque about the axle removes the wheel's angular momentum.

Find the braking torque.

Why: The friction acts tangentially at the rim.

\[ \tau = fR = (25)(0.30) = 7.5\,\text{N m} \]

Use the angular impulse to find the time.

Why: The wheel's angular momentum falls from Iω₀ to zero; the torque is constant, so the angular impulse is τΔt.

\[ \tau\,\Delta t = I\omega_0 \;\Rightarrow\; \Delta t = \frac{(0.80)(40)}{7.5} = \frac{32}{7.5} = 4.3\,\text{s} \]

Find the angle from the average angular speed.

Why: Constant torque means constant deceleration, so the average ω is half of 40 rad/s.

\[ \Delta\theta = \tfrac{1}{2}(40)(4.27) = 85\,\text{rad} \approx 13.6\,\text{rev} \]

Cross-check with work and energy.

Why: The brake's work τΔθ = 7.5 × 85.3 = 640 J should equal the initial kinetic energy ½(0.80)(40)² = 640 J. It does.

Two routes to two different questions: angular impulse gives the time, work gives the angle. The same split you used for linear braking.

This problem asks two questions, and each one belongs to a different tool.

How long does the wheel take to stop? That is a time question, so use angular impulse. The friction from the brake pad exerts a torque of 25 newtons times 0.30 metres, which is 7.5 newton-metres. The wheel's angular momentum is 0.80 times 40, which is 32. Dividing, the torque needs about 4.3 seconds to remove it all.

Through how many revolutions does it turn? That is an angle question. With constant torque the deceleration is constant, so the average angular speed is half the initial value, and the angle is that average times the time: about 85 radians, or 13.6 revolutions.

The cross-check with energy is valuable. The brake's work is torque times angle, which comes out at 640 joules. The wheel's initial kinetic energy is ½ times 0.80 times 40 squared — also 640 joules. The two methods, built from integrating the same law over time and over angle, agree perfectly.

That pairing — impulse for time, work for angle — is the same pairing you learned for linear braking, where impulse gave stopping time and work gave stopping distance. The rotational dictionary keeps holding.

43. Conservation of Angular Momentum

Section

Section 6

44. No external torque, no change in angular momentum

Concept

\[ \vec{\tau}_{\text{ext}} = 0 \quad\Longrightarrow\quad \vec{L} = \text{constant} \quad\Longrightarrow\quad I_i\omega_i = I_f\omega_f \]

The argument copies the linear one. Internal forces come in equal and opposite pairs along the line joining the two particles, so their torques about any point also cancel in pairs. Only external torques change the total angular momentum.

Two features have no linear counterpart, and both drive the examples that follow:

That second point is the rotational version of ‘choose the system’, and it is the most powerful trick in this unit.

If the net external torque on a system is zero, its total angular momentum cannot change. The argument mirrors the one for linear momentum. Internal forces come in equal and opposite pairs, and for ordinary forces both act along the line joining the two particles. Two equal and opposite forces along the same line have equal and opposite torques about any point. So internal torques cancel in pairs, and only external torques can change the total.

Two things make rotation richer than translation here, and both power the examples that follow.

The first is that a system can change its own moment of inertia. A skater cannot change their mass, but they can move it — arms in, arms out. That changes I while L stays fixed, so ω must change to compensate. There is no linear analogue: you cannot make yourself lighter to speed up.

The second is the freedom to choose the reference point. A force that acts through a point has no torque about that point. So if there is a pivot exerting some huge, unknown force during a collision, take angular momentum about the pivot and that force disappears from the problem. The same force spoils linear momentum completely. Choosing the point is the rotational version of choosing the system, and it is the single most useful trick in this unit.

45. The spinning skater pulls in their arms

Worked example

A skater spinning at 2.0 rev/s with arms outstretched has a moment of inertia of 4.0 kg m². Pulling the arms in reduces it to 1.6 kg m². Find the new spin rate and compare the kinetic energies.

Figure (svg): Top view of a skater, first with arms extended and a slow rotation arrow, then with arms pulled in and a faster rotation arrow.

With no external torque, a smaller moment of inertia forces a faster spin.

Conserve angular momentum.

Why: The ice exerts negligible torque about the vertical axis, so L is constant. Revolutions per second can stay as they are — the units cancel on both sides.

\[ (4.0)(2.0) = (1.6)\,\omega_f \;\Rightarrow\; \omega_f = 5.0\,\text{rev/s} \]

Compare the kinetic energies using K = L²/2I.

Why: With L fixed, K is inversely proportional to I.

\[ \frac{K_f}{K_i} = \frac{I_i}{I_f} = \frac{4.0}{1.6} = 2.5 \]

The kinetic energy went up by a factor of 2.5. Angular momentum is conserved; kinetic energy is not — and the extra came from the skater's muscles, which had to pull the arms inward against their tendency to fly outward.

Watch the animation: arms out, slow spin; arms in, fast spin. The physics is one line of algebra, and the energy discussion afterwards is the real lesson.

The ice is nearly frictionless, so there is negligible torque about the vertical axis, and angular momentum is conserved. With I falling from 4.0 to 1.6 kg m², ω must rise by the same factor, from 2.0 to 5.0 revolutions per second. You can leave ω in revolutions per second here because the same unit appears on both sides and cancels — but only because this is a ratio. As soon as you compute an energy, convert to radians per second.

Now the energy. Using K = L²/2I with L fixed, the energy is inversely proportional to the moment of inertia, so it rises by the factor 4.0 over 1.6, which is 2.5. Kinetic energy has more than doubled.

That extra energy did not come from nowhere. In the rotating skater's arms there is an outward tendency — the arms want to fly out, and holding them in requires an inward pull. Pulling them closer means pulling against that tendency through a distance, which is work. The skater's muscles supply it. Internal forces cannot change the angular momentum, but they can, and here do, change the kinetic energy.

46. Does the skater's kinetic energy change?

Prediction

Predict first

A spinning skater extends their arms, doubling their moment of inertia. With negligible friction from the ice, what happens to their rotational kinetic energy?

  • It stays the same, since nothing external acted
  • It halves
  • It doubles
  • It falls to one quarter

Correct: It halves

Why: Angular momentum is conserved, so with I doubled, omega halves. Then K = L²/2I halves too. The missing energy went into the skater's muscles, which did negative work letting the arms move outward — the reverse of the work they did pulling them in.

‘Nothing external acted’ is the right reason for angular momentum to stay the same and the wrong reason for energy to. Internal forces — muscles here — can do work and change kinetic energy freely; they just cannot change L.

Exactly the same distinction appeared with linear momentum: an explosion is internal, leaves total momentum untouched, and creates kinetic energy from nothing visible.

This prediction reverses the previous example, and it is designed to catch one specific reasoning error: thinking that ‘nothing external acted’ means ‘nothing is conserved except everything’.

Doubling the moment of inertia with angular momentum fixed halves the angular speed. Then the kinetic energy, L²/2I, halves as well. So the skater ends with half their rotational kinetic energy.

The tempting option, ‘it stays the same, since nothing external acted’, uses the right reason for the wrong quantity. No external torque guarantees that angular momentum is conserved. It guarantees nothing about energy, because internal forces — muscles, springs, explosions — can do work and change the kinetic energy freely. Here, the arms swing outward and the muscles resist, absorbing energy, just as your legs absorb energy when you land from a jump.

You met precisely the same distinction with linear momentum. In an explosion, the internal forces leave total momentum untouched and create kinetic energy out of stored chemical energy. Momentum and energy are separate accounts, and a statement about one tells you nothing about the other.

47. A child steps onto a merry-go-round

Worked example

A playground merry-go-round is a uniform disc of mass 200 kg and radius 2.0 m, turning freely at 1.5 rad/s. A 40 kg child standing on the ground steps onto its rim with no tangential speed of their own. Find the new angular speed and the kinetic energy lost. Then the child walks to the centre: what happens?

Figure (svg): Top view of a turning merry-go-round, with a child at the rim who has just stepped on from the ground, and a dashed path showing the child later walking in to the centre.

The child adds moment of inertia without adding angular momentum.

Find the moments of inertia before and after.

Why: The child at the rim acts as a point mass at r = 2.0 m.

\[ I_i = \tfrac{1}{2}(200)(2.0)^2 = 400\,\text{kg m}^2 \qquad I_f = 400 + (40)(2.0)^2 = 560\,\text{kg m}^2 \]

Conserve angular momentum about the axle.

Why: The axle's force acts through the axis and has no torque about it. The child brings no angular momentum.

\[ (400)(1.5) = 560\,\omega_f \;\Rightarrow\; \omega_f = 1.07\,\text{rad/s} \]

Compare energies.

Why: Use K = L²/2I with L = 600 kg m²/s.

\[ K_i = \frac{600^2}{2(400)} = 450\,\text{J} \qquad K_f = \frac{600^2}{2(560)} = 321\,\text{J} \]

Interpret the 129 J lost.

Why: Stepping on is a rotational perfectly inelastic collision: the child's feet skid briefly on the deck until they move with it, and kinetic friction turns that energy into heat.

Now the child walks to the centre.

Why: Their contribution to I falls to zero, so I returns to 400 kg m² and ω returns to 1.5 rad/s. Kinetic energy rises back to 450 J — supplied by the child's legs, which must push against the centripetal pull to walk inward.

This problem has two halves, and together they show angular momentum conserved through both an energy loss and an energy gain.

In the first half, a child with no tangential speed steps onto the rim of a turning merry-go-round. The axle exerts force, but through the axis, so there is no torque about it; angular momentum about the axle is conserved. The child brings none, but adds moment of inertia: forty kilograms at two metres adds 160 kg m². So I rises from 400 to 560, and ω falls from 1.5 to about 1.07 rad/s.

The energy drops from 450 to 321 joules. Stepping on is a perfectly inelastic collision in rotational form — the child's feet slip on the deck for a moment until they move with it, and that brief kinetic friction converts 129 joules to heat. This is the rotational twin of a mass dropped onto a moving cart.

In the second half, the child walks to the centre. Their contribution to I falls to zero, I returns to 400, and ω returns to 1.5 rad/s. The kinetic energy rises back to 450 joules. That energy comes from the child's legs. Walking inward on a rotating platform means pushing against the tendency to be flung outward — anyone who has tried it on a playground knows it takes effort.

48. A ball of putty strikes a pivoted rod

Worked example

A uniform rod of mass 1.2 kg and length 0.90 m lies on a frictionless table, pivoted at one end. A 0.10 kg ball of putty sliding at 12 m/s perpendicular to the rod strikes the free end and sticks. Find the angular speed just after the collision.

Figure (svg): Top view of a rod pivoted at its left end, with a putty ball approaching its free right end perpendicular to the rod, and a curved arrow showing the resulting rotation about the pivot.

Take angular momentum about the pivot so the pivot's unknown force has no torque.

Choose the reference point: the pivot.

Why: During the impact the pivot exerts a large, unknown force on the rod. About the pivot that force has zero lever arm, so angular momentum about the pivot is conserved even though linear momentum is not.

Angular momentum before: the putty alone.

Why: A particle moving perpendicular to the rod at distance L from the pivot.

\[ L_i = mvL = (0.10)(12)(0.90) = 1.08\,\text{kg m}^2/\text{s} \]

Moment of inertia after: rod about its end, plus putty at the end.

Why: The rod turns about its end, so it contributes ML²/3; the putty is a point mass at distance L.

\[ I_f = \tfrac{1}{3}ML^2 + mL^2 = 0.324 + 0.081 = 0.405\,\text{kg m}^2 \]

Solve for ω.

Why: Set L_i = I_f ω.

\[ \omega = \frac{1.08}{0.405} = 2.67\,\text{rad/s} \]

Check the energy, which should fall.

Why: Before: ½(0.10)(12)² = 7.2 J. After: L²/2I = 1.08²/0.81 = 1.44 J. Only a fifth survives — a perfectly inelastic collision, rotational edition.

This is the canonical rotational collision, and its whole difficulty is in the first step: deciding what to conserve.

During the impact, the pivot holds the end of the rod in place. To do that, it must push on the rod with a large force for the brief duration of the collision. That force is external, and it is unknown. So linear momentum of the putty-plus-rod system is not conserved.

But the pivot force acts at the pivot. About the pivot, its lever arm is zero, and so is its torque. So angular momentum about the pivot is conserved during the impact, even though linear momentum is not. Choosing the pivot as the reference point makes the unknown force disappear.

Before the impact, only the putty carries angular momentum about the pivot: m v times its perpendicular distance from the pivot, which is the full length of the rod. After, the rod and putty rotate together. The rod about its end contributes a third of ML², and the putty at the end adds mL². Divide, and ω is about 2.67 rad/s.

The energy check confirms it is perfectly inelastic, as expected for something that sticks: 7.2 joules before, 1.44 after. Four fifths of the energy went into deforming the putty.

49. Find the mistake in this rod-collision attempt

Error analysis

A student attacks the putty-and-rod problem like this, then converts the result to an angular speed using v_cm = ω L/2:

Annotate

On: \( mv = (M + m)v_{\text{cm}} \;\Rightarrow\; v_{\text{cm}} = \frac{(0.10)(12)}{1.3} = 0.92\,\text{m/s} \;\Rightarrow\; \omega = \frac{0.92}{0.45} = 2.05\,\text{rad/s} \)

  • Conserves LINEAR momentum. But the pivot pushes on the rod during the impact — an external force — so linear momentum of rod plus putty is not conserved. That single assumption is the whole error.
  • From the correct answer, the total linear momentum just after is (M·L/2 + m·L)ω = 0.63 × 2.67 = 1.68 kg m/s, compared with 1.2 before. The pivot delivered an impulse of 0.48 N s.
  • Even the second step is muddled: the rod-plus-putty centre of mass is not at L/2 once the putty is stuck on the end.
  • Conserve ANGULAR momentum about the pivot, where the pivot force has no torque: mvL = (ML²/3 + mL²)ω, giving 2.67 rad/s.

The general lesson: a pivot spoils linear momentum and leaves angular momentum about itself intact. Whenever something is hinged, nailed or on an axle, angular momentum about that point is the quantity to conserve.

The attempt shown is the single most common error on rotational collision problems, and it is worth understanding exactly why it fails.

The student conserves linear momentum — m v equals the total mass times the speed of the centre of mass — exactly as they would for two carts colliding on a track. The arithmetic is fine. The physics is not, because the pivot exerts an external force during the impact. Linear momentum is conserved only when the external force is zero, and here it is not.

How big is that external effect? You can find out from the correct answer. Just after the collision, the rod's centre moves at ω times L/2 and the putty at ω times L. Adding the momenta gives 1.68 kg m/s, compared with 1.2 before. The pivot has delivered an impulse of 0.48 newton-seconds — not a small correction, but forty percent of the original momentum.

The rest of the attempt inherits the error and adds a second one: the centre of mass of rod plus putty is not at the rod's midpoint once the putty sits on the end.

The correction is to conserve angular momentum about the pivot, where the pivot's force has no torque. The general lesson is short enough to memorise: a pivot spoils linear momentum and preserves angular momentum about itself.

50. The bowling ball again, in one line

Worked example

Return to the skidding bowling ball, launched at v₀ with no spin. Section 4 needed two equations of motion and a time. Angular momentum gets the final speed directly.

Choose a reference point on the lane, on the line the contact point travels along.

Why: Friction acts along the floor through that line, so it has zero torque about it. Gravity and the normal force are equal, opposite, and act along the same vertical line through the centre and the contact point, so their torques cancel. Net external torque: zero.

Angular momentum before: the centre moving at height R, no spin.

Why: Orbital part only, M v₀ times the perpendicular distance R.

\[ L_i = Mv_0R \]

Angular momentum after: the orbital part plus the spin part.

Why: Rolling now, so ω = v/R, and the spin is in the same sense as the orbital part.

\[ L_f = MvR + \tfrac{2}{5}MR^2\frac{v}{R} = \tfrac{7}{5}MvR \]

Equate.

Why: No external torque about the floor point, so the two must be equal; M and R cancel.

\[ Mv_0R = \tfrac{7}{5}MvR \;\Rightarrow\; v = \tfrac{5}{7}v_0 \]

Same answer as before, no μ_k, no time — which explains why μ_k cancelled last time. Angular momentum about the floor was conserved all along; the force method was just a long way round to discovering it.

Back in section 4, finding the bowling ball's final speed took two equations of motion, a time, and a substitution. Here is the same answer from a single conservation law.

The trick is the reference point. Choose a point on the floor, on the line along which the ball's contact point travels. Friction acts along the floor, through that line, so it has zero torque about the point. Gravity acts down through the centre and the normal force acts up through the contact point. These two are equal and opposite, and they are always vertically aligned with each other, so they act along the same vertical line and their torques about any point cancel. Net external torque: zero. Angular momentum about that floor point is conserved.

Before, the ball has no spin, so its angular momentum is just the orbital part: M v₀ times the height of the centre, R. After, it has the orbital part M v R plus the spin part, two fifths M R² times v over R. Both are in the same rotational sense. Adding them gives seven fifths of M v R.

Set them equal and you get five sevenths of v₀ directly. No μ_k, no time, no graph. This is why μ_k cancelled before: the friction only decided how quickly the ball reached its final state, while angular momentum about the floor decided what that state had to be.

51. Two discs clutch together

Worked example

A disc with I₁ = 0.60 kg m² spins at 30 rad/s on a frictionless axle. A second disc, I₂ = 0.30 kg m², initially at rest, is dropped onto the same axle and the two grip until they turn together. Find the final angular speed and the energy lost.

Figure (svg): Side view of two discs on a shared vertical axle, the upper one dropping onto the spinning lower one, then both turning together.

A rotational perfectly inelastic collision: angular momentum survives, kinetic energy does not.

Conserve angular momentum about the axle.

Why: The friction between the discs is internal; the frictionless axle exerts no torque.

\[ (0.60)(30) + 0 = (0.60 + 0.30)\,\omega_f \;\Rightarrow\; \omega_f = \frac{18}{0.90} = 20\,\text{rad/s} \]

Compare kinetic energies.

Why: Use ½Iω² before and after, with the combined moment of inertia afterwards.

\[ K_i = \tfrac{1}{2}(0.60)(30)^2 = 270\,\text{J} \qquad K_f = \tfrac{1}{2}(0.90)(20)^2 = 180\,\text{J} \]

Generalise the fraction lost.

Why: With L fixed, K = L²/2I, so the surviving fraction is I₁/(I₁ + I₂) = 2/3. One third, 90 J, went into heat while the discs slipped against each other.

Compare the linear perfectly inelastic collision, where the surviving fraction is m₁/(m₁ + m₂). Same formula, I in place of m — one more line in the dictionary.

A clutch is a rotational perfectly inelastic collision. Two bodies on the same axle grip each other until they turn together, just as two carts that stick end up with a common velocity.

The frictional forces between the discs are internal to the system of both discs, and the axle is frictionless, so no external torque acts about the axis. Angular momentum is conserved. The first disc carries 0.60 times 30, which is 18 kg m²/s; the second carries none. Afterwards both turn together with a combined moment of inertia of 0.90, so ω is 20 rad/s.

The energy drops from 270 joules to 180. While the discs were slipping against each other, kinetic friction at the sliding interface converted 90 joules to heat — exactly the mechanism that wears out a real clutch plate.

The general result is elegant. With L fixed, kinetic energy is L²/2I, so the surviving fraction is the ratio of moments of inertia, I₁ over I₁ plus I₂. For the linear perfectly inelastic collision, the surviving fraction was m₁ over m₁ plus m₂. Same formula, I in place of m. One more line in the dictionary, and one more confirmation that rotation reuses everything you already know.

52. Match each situation to what is conserved

Matching

Match the pairs

  • a. putty sticks to the end of a rod pivoted at its other end — during the impact
  • b. a solid ball rolls without slipping down a rough ramp
  • c. a skater pulls in their arms
  • d. two pucks collide elastically on frictionless ice
  • 1. angular momentum about the pivot only
  • 2. mechanical energy only
  • 3. angular momentum only — kinetic energy rises
  • 4. linear momentum, angular momentum and kinetic energy

Why: The pivot's force spoils linear momentum but has no torque about the pivot, and the sticking destroys energy, so only angular momentum about the pivot survives. The rolling ball feels gravity's torque about the contact point and an external force, so neither momentum is conserved, but static friction does no work. The skater has no external torque but their muscles do work. The pucks feel no external force or torque and the collision is elastic, so everything is conserved.

The skill being tested is not computing — it is auditing. For each candidate quantity, ask: is there an external force (linear momentum)? An external torque about my chosen point (angular momentum)? Any sliding, sticking or muscle work (energy)?

This matching exercise is really an auditing exercise, and the method matters more than the answers.

For each situation, ask three questions. Is there an external force? If so, linear momentum is not conserved. Is there an external torque about the point I care about? If so, angular momentum about that point is not conserved. Is anything sliding, sticking, deforming, or being pushed by muscles? If so, mechanical energy is not conserved.

Apply them to the putty and rod: external force at the pivot, yes; torque about the pivot, no; sticking, yes. Only angular momentum about the pivot survives. The rolling ball: gravity is an external force and has a torque about most points, so neither momentum is conserved; but nothing slides, so mechanical energy is. The skater: no external torque, so angular momentum is conserved; but muscles do work, so energy rises. The elastic pucks on frictionless ice: no external force, no external torque, no losses — everything is conserved.

These four cases between them cover nearly every combination an exam can ask about. Running the three questions in order is quicker and more reliable than trying to recognise the situation by its look.

53. How does a falling cat turn over with no angular momentum?

Socratic

A cat dropped upside down, with zero angular momentum, lands on its feet. If L stays zero the whole way down, how can it end up rotated?

Discussion prompt

Reason it through: does conservation of angular momentum forbid a body with L = 0 from changing its orientation? What could the cat do with its own shape to get around it?

This is a genuine puzzle, and it puzzled physicists too until high-speed photography showed what cats actually do.

Start with what conservation forbids. If L is zero, then the total of Iω over all parts of the body is zero at every instant. That forbids the cat as a whole from spinning. It does not forbid one part of the cat rotating one way while another part rotates the other way, as long as the two contributions cancel.

The cat exploits this by changing which half is easier to turn. It tucks its front legs in, making the front half's moment of inertia small, and stretches its back legs out, making the back half's large. Then it twists. To keep the total zero, the small-inertia front half turns a long way while the large-inertia back half turns only a little the other way. Then it reverses the arrangement — front legs out, back legs tucked — and twists again, bringing the back half round while the front barely moves back.

After the cycle, both halves have turned the same way, and the total angular momentum was zero throughout. A rigid body could never do this; it is possible only because the cat changes shape. Astronauts learn the same manoeuvre to turn themselves around in orbit, and spacecraft do it with internal reaction wheels.

54. Why collapsed stars spin hundreds of times a second

Real world

When a massive star runs out of fuel, its core — roughly the Sun's size and turning about once a month — collapses to a neutron star about 10 km across, in about a second.

Discussion prompt

Treat the core as a uniform sphere that keeps its mass and its angular momentum while its radius falls from 7 × 10⁵ km to 10 km. Estimate its new rotation period if it started at 25 days.

This is the spinning skater on a cosmic scale, and the estimate is a good test of whether you can use the conservation law with scaling rather than with numbers.

The collapse is driven by the core's own gravity, which is internal to the core, so there is no external torque and the angular momentum is conserved. For a uniform sphere of fixed mass, I is proportional to R². So if L is fixed, ω is proportional to one over R², and the period is proportional to R².

The radius falls from about seven hundred thousand kilometres to ten kilometres, a factor of seventy thousand. The period therefore shrinks by seventy thousand squared, about five billion. Twenty-five days is a little over two million seconds, and dividing by five billion gives under half a millisecond — more than two thousand turns per second.

The real figure for the fastest known pulsars is around seven hundred turns per second, and most young pulsars turn much more slowly, because a real collapsing core sheds a great deal of angular momentum in the material it blows off and through its magnetic field. But the estimate is the right order of magnitude, and it explains why something as large as a stellar core can end up rotating faster than a kitchen blender.

55. Putting It Together

Section

Section 7

56. The linear-to-rotational dictionary

Comparison

Comparison matrix

quantitylinearrotational
inertiamI
kinetic energy½mv²½Iω²
work∫F dx∫τ dθ
powerFvτω
momentump = mvL = Iω
second law, general formF = dp/dtτ = dL/dt
impulse∫F dt = Δp∫τ dt = ΔL
conserved whenno external forceno external torque

Every row is the same theorem with the substitutions m → I, x → θ, v → ω, F → τ. If you can do the linear version, you can do the rotational one — the only genuinely new thing is that angular quantities depend on the reference point, and choosing it well is part of the problem.

This is the dictionary that has been building across the whole deck. Fill in the blanks before you reveal them; each should take a second.

Every row is the same theorem written twice. Mass becomes moment of inertia. Displacement becomes angle. Velocity becomes angular velocity. Force becomes torque. Under those substitutions, kinetic energy, work, power, momentum, the second law, impulse and the conservation condition all translate exactly.

This is not a coincidence or a memory aid. Each rotational result was derived from its linear twin by the same steps — summing over particles, or integrating Newton's law over angle or over time. Because the derivations are the same, the results must be the same in form.

There is one genuinely new feature, and it does not appear in the table. Angular quantities depend on the reference point. Linear momentum is the same whoever measures it; angular momentum is not. That is both a complication and an opportunity, because choosing the point well is how you make unknown forces disappear.

57. Deciding what to conserve when things rotate

Pattern

  1. Is something sliding, sticking or skidding? Then mechanical energy is not conserved across that stage. Rolling without slipping is fine.
  2. Is there a pivot, axle or hinge? Then linear momentum is not conserved during an impact — but angular momentum about the pivot is.
  3. Is the body changing shape? Then angular momentum is conserved but kinetic energy is not, because internal forces do work.
  4. Is the stage brief and violent — a collision, a catch, a clutch engaging? Use angular momentum across it, about a point that kills the unknown forces.
  5. Is the stage smooth and long — rolling down, swinging up? Use energy across it, with both kinetic terms.
  6. Multi-stage? Draw a line between stages and choose the law separately on each side, exactly as for the ballistic pendulum.

The classic AP problem chains these: putty hits a hanging rod (angular momentum about the pivot), then the rod swings up (energy). Using energy across the impact, or angular momentum across the swing, is wrong — and they are the two errors examiners design the question to catch.

This is the decision procedure for every rotational problem, and in the exam it matters more than any individual formula.

The first three questions identify what is spoiled. Sliding, sticking or skidding spoils mechanical energy. A pivot spoils linear momentum during an impact, while preserving angular momentum about itself. A body changing shape keeps its angular momentum but not its kinetic energy.

The next two questions match tools to the type of stage. Brief, violent stages — collisions, catches, clutches engaging — are where angular momentum shines, because the large unknown forces act for so short a time that only their torques about a well-chosen point matter, and you can choose a point where they vanish. Smooth, extended stages — rolling down a slope, a rod swinging up after a collision — are where energy shines, because forces like gravity do work you can calculate.

And the last question is the one that catches most students. Many problems chain two stages. The classic is putty striking a hanging rod and the rod then swinging up. Angular momentum about the pivot across the impact; energy across the swing. Using energy across the impact ignores the loss to the sticking. Using angular momentum across the swing ignores gravity's torque. Examiners design these questions precisely to see whether you split the stages.

58. The putty and the rod: what survives the impact?

Check

Putty strikes and sticks to the end of a rod that hangs from a frictionless pivot at its top end.

Check your understanding

During the brief impact, which quantity is conserved for the system of putty plus rod?

  • A. Linear momentum
  • B. Kinetic energy
  • C. Angular momentum about the pivot (correct)
  • D. All three

Answer: C

Why: The pivot exerts a large external force during the impact, but that force acts at the pivot and has zero torque about it. Gravity's torque is finite and acts for a negligibly short time. So angular momentum about the pivot is conserved, and nothing else is.

Why A tempts people
The pivot pushes on the rod during the impact, which is an external force, so linear momentum changes. This is the most common mistake on rod-collision problems.
Why B tempts people
The putty sticks, so the collision is perfectly inelastic and kinetic energy is lost to deformation and heat.
Why D tempts people
Only one of the three survives; the pivot force spoils linear momentum and the sticking spoils kinetic energy.

59. Kinetic energy of a rolling hoop

Check

A thin hoop of mass 2.0 kg rolls without slipping at 3.0 m/s.

Check your understanding

What is its total kinetic energy?

  • A. 9.0 J
  • B. 13.5 J
  • C. 18 J (correct)
  • D. 27 J

Answer: C

Why: For a hoop, beta = 1, so the total kinetic energy is ½Mv²(1 + 1) = Mv² = (2.0)(3.0)² = 18 J — half translational and half rotational.

Why A tempts people
That is the translational part ½Mv² alone; it leaves out the spin, which for a hoop is just as large.
Why B tempts people
That is ½Mv² times (1 + ½), the result for a solid disc, not a hoop.
Why D tempts people
That treats the rotational part as twice the translational one; for a hoop they are equal.

60. A cylinder rolls down a ramp

Check

A uniform solid cylinder starts from rest and rolls without slipping down a ramp, descending a vertical height of 1.2 m.

Check your understanding

What is its speed at the bottom? (g = 9.8 m/s²)

  • A. 4.85 m/s
  • B. 4.10 m/s
  • C. 3.96 m/s (correct)
  • D. 3.43 m/s

Answer: C

Why: Energy conservation with beta = ½ gives Mgh = ¾Mv², so v = √(4gh/3) = √(15.68) = 3.96 m/s. Mass and radius cancel.

Why A tempts people
That is √(2gh), the speed of a frictionless sliding block — it ignores the energy stored in spin.
Why B tempts people
That is the result for a solid sphere (beta = 2/5), which is faster than a cylinder.
Why D tempts people
That is √(gh), the result for a thin hoop (beta = 1), which is slower than a cylinder.

61. How much energy is stored in Earth's spin?

Estimation

Predict first

Earth has mass 6.0 × 10²⁴ kg, radius 6.4 × 10⁶ m, a moment of inertia of about 0.33MR² (it is denser at the centre), and turns once a day. Roughly how much rotational kinetic energy does it have?

  • About 10¹⁹ J
  • About 10²⁴ J
  • About 10²⁹ J
  • About 10³⁴ J

Correct: About 10²⁹ J

Why: I ≈ 0.33 × 6.0e24 × (6.4e6)² ≈ 8 × 10³⁷ kg m². One turn a day is ω = 2π/86400 ≈ 7.3 × 10⁻⁵ rad/s, so ω² ≈ 5.3 × 10⁻⁹. Then K = ½Iω² ≈ 2 × 10²⁹ J — roughly half a million years of current world energy use.

The slow spin is what keeps the number modest: ω is tiny, and it is squared. Even so, the Moon's tides are draining this store, lengthening the day by about 2 milliseconds per century — and the angular momentum Earth loses is not destroyed, it goes into the Moon's orbit, which is slowly widening.

This estimate is an exercise in powers of ten, so do it in your head before checking.

The moment of inertia is about a third of six times ten to the twenty-four kilograms times the radius squared. The radius squared is about four times ten to the thirteen, so the product comes to roughly eight times ten to the thirty-seven kilogram square metres.

The angular speed is one turn per day: two π divided by eighty-six thousand four hundred seconds, about seven times ten to the minus five radians per second. Squared, that is about five times ten to the minus nine. Half of eight times ten to the thirty-seven times five times ten to the minus nine gives about two times ten to the twenty-nine joules.

That is a staggering amount by human standards, but it is smaller than you might guess for a planet, because Earth turns so slowly and the ω is squared. The coefficient 0.33 rather than 0.4 is real information too: Earth is denser at its core than near its surface, so its mass sits closer to the axis than a uniform sphere's would.

The tidal footnote ties the whole deck together. The Moon's tides rob Earth of spin energy and angular momentum, lengthening the day. The energy turns to heat in the oceans, but the angular momentum is conserved: it is transferred to the Moon's orbit, which is why the Moon is drifting slowly away.

62. Four questions before you close the deck

Exit ticket

Discussion prompt

From memory: (1) Why does static friction do no work on a ball rolling without slipping? (2) A hoop and a disc race down a ramp — which wins, and does mass matter? (3) A skater pulls in their arms: what happens to L, ω and K? (4) Putty sticks to a pivoted rod — which quantity do you conserve during the impact, and about what point?

63. What you can do now

Recap

the ideathe one-line version
K_rot = ½Iω²½mv² summed over pieces moving at different speeds
K_rolling = ½Mv²(1 + β)translation plus spin about the centre
static friction on a rollerno work — the contact point is at rest
a = g sin θ / (1 + β)the race depends on shape, never on mass or size
L = r × p, L = Iωalways about a stated point
τ = dL/dtno external torque, L is constant
K = L²/2Ichange I at fixed L and the energy changes

Next deck: oscillations. The pendulum, the mass on a spring and the physical pendulum all come down to one differential equation — and the physical pendulum will need the moment of inertia and the torque equation you have just finished building.

Look back at how little of this deck was truly new. Rotational kinetic energy was ½mv² summed over pieces. Rotational work was force through a distance, rewritten as torque through an angle. Angular momentum was linear momentum viewed from a point. The conservation laws followed from the same arguments as before. The dictionary of substitutions carried almost everything.

The genuinely new ideas are few, and they are the ones to rehearse. Rolling shares energy between translation and spin through the shape factor β. Static friction on a rolling body does no work, while kinetic friction on a skidding one does. And angular momentum belongs to a reference point, which you choose to make unknown forces vanish.

If you can do three things fluently, you are ready for the rotational questions on the exam: write energy conservation for a rolling body with both kinetic terms, conserve angular momentum about a pivot across an impact, and say clearly which law applies to each stage of a multi-stage problem.

The next deck turns to oscillations. The physical pendulum — any rigid body swinging about a pivot — needs exactly the torque equation and the moment of inertia you have now mastered.

Sources

  1. AP Physics C: Mechanics Course and Exam Description, Unit 6 (Energy and Momentum of Rotating Systems) — College Board, 2024
  2. AP Physics C Table of Information and Equation Tables (rotational kinetic energy, angular momentum) — College Board, 2024

Want this taught 1-on-1? Alexander tutors AP Physics C: Mechanics — $55/session, free consultation.

Book on Wyzant · Text (657) 465-8108