Unit 6 of the algebra-based course, organised around the one decision every rotation problem turns on: is there a collision, grab or change of shape, so angular momentum is conserved, or smooth motion, so energy is? It builds rotational kinetic energy from the shape table, writes the energy of anything rolling as one plus k times one half M v squared, solves the incline race and explains why mass and radius cancel, covers rotational work and power, angular momentum of spinning bodies and passing particles, angular impulse from torque-time graphs, the skater, merry-go-round, putty-on-a-rod and clutch problems with their energy losses, and closes with Kepler's second law as conservation of angular momentum. No calculus is used anywhere.
Subject: AP Physics 1 · 75 slides · diagram-first lesson
Open the interactive version of this deck
Title
Unit 6
Spin energy, rolling, and angular momentum — Units 3 and 4 again, for things that turn
Objectives
Unit 5 gave you torque, the rotational version of force. This unit does for rotation exactly what Units 3 and 4 did for straight-line motion: it builds the energy tool and the momentum tool, so that most problems can be solved without ever finding an acceleration.
College Board, AP Physics 1: Algebra-Based Course and Exam Description Unit 6, Energy and Momentum of Rotating Systems
Section
One decision per problem
Concept
There is almost no new physics here. Energy is still conserved when nothing dissipates it, and momentum is still conserved when nothing outside pushes. What changes is that a spinning object has somewhere new to put energy, and a new kind of momentum to keep track of.
So the hard part of the unit is not any single formula. It is deciding, at the start of each problem, which conservation law the situation actually allows.
OpenStax, College Physics 2e — chapter 10, rotational motion and angular momentum chapter 10.4 and 10.5
Picture it
The same shape as the Unit 1 method. Step two is new, and it is the step that most wrong answers skip.
Figure (svg): A five-step vertical flow: draw the system and axis, decide whether there is a collision, conserve angular momentum if so, conserve energy with a spin term if not, then link v and omega and check
Most students who get rotational problems wrong did the algebra correctly. They conserved the wrong thing — kinetic energy through a collision, or linear momentum about a pivot.
Prediction
Before any equations. A solid disk and a ring of the same mass and radius are released together at the top of a ramp, and both roll without slipping.
Predict first
Which reaches the bottom first?
Correct: The solid disk
Why: The disk wins on every ramp, of every steepness. Both start with the same gravitational energy, but the ring has to put half of it into spinning, while the disk puts only a third into spinning. More energy left over for moving forward means a faster disk at every point down the slope. Part 4 turns this into numbers.
Section
Where the spin energy lives
Concept
A wheel spinning on a fixed axle goes nowhere, so its ordinary kinetic energy looks like zero. But every piece of it is moving, and a piece further from the axle moves faster. Add up the kinetic energy of every piece and you get a single compact result.
Figure (svg): A spinning wheel with three marked points at increasing radius, each with a velocity arrow that grows with distance from the axle, beside the formula for rotational kinetic energy
\[ K_{\text{rot}} = \tfrac{1}{2} I \omega^2 \]
The moment of inertia I plays the part mass played before, and the angular speed ω plays the part of speed. The formula is not a new law — it is the old kinetic energy, summed over a spinning body.
OpenStax, College Physics 2e — chapter 10, rotational motion and angular momentum chapter 10.4
Picture it
You will not be asked to derive these, but you will be asked to use them and to rank them. Every one is the same mass and radius times a number.
Figure (svg): Four shapes of equal mass and radius — a ring, a hollow sphere, a solid disk and a solid sphere — labelled with their moments of inertia and the coefficient k from one down to 0.4
Writing I as k times M R squared turns the table into a single number per shape, and that number is all that distinguishes them in every problem in this unit.
Socratic
Worth understanding rather than memorising, because it tells you how to guess every other formula in the unit.
Discussion prompt
Why does the rotational kinetic energy have exactly the same shape as one half m v squared?
Hint: What is the speed of a piece of the wheel at radius r?
Answer:
Because it is one half m v squared, applied to each piece and added up. Every piece moves at its radius times ω, so each contributes one half times its mass times its radius squared times ω squared.
The ω squared is common to every piece, so it comes out of the sum. What is left inside is the sum of each mass times its radius squared — and that sum is the definition of I.
So the pattern is a dictionary: mass becomes I, speed becomes ω. Use that dictionary on momentum and you get angular momentum, I times ω, which is where Part 6 goes.
Worked example
A flywheel is a solid disk of mass 20 kg and radius 0.30 m, spinning at 50 rad/s about its axle. How much kinetic energy does it store?
Get I from the shape table
Why: A solid disk has k equal to one half.
\[ I = \tfrac{1}{2}MR^2 = \tfrac{1}{2}(20)(0.30)^2 = 0.90 \text{ kg}\,\text{m}^2 \]
Put it into the spin energy
Why: The wheel is not moving as a whole, so there is no translational term at all.
\[ K = \tfrac{1}{2}(0.90)(50)^2 = 1125 \text{ J} \approx 1.1 \text{ kJ} \]
Figure (svg): The spinning wheel with velocity arrows growing with radius, shown again for reference
Verify: against a ring of the same mass
Why: The rim moves at 0.30 times 50, which is 15 m/s. If all 20 kg sat at the rim, the energy would be one half times 20 times 15 squared, which is 2250 J. A disk has k of one half, so it should hold exactly half of that: 1125 J. Same answer by a second route.
OpenStax, College Physics 2e — chapter 10, rotational motion and angular momentum chapter 10.4, example on rotational kinetic energy
Estimation
Number sense first. A bicycle wheel is close to a ring: about 2 kg, radius about 0.35 m, spinning at 20 rad/s while you ride.
Predict first
Roughly how much spin energy does it hold?
Correct: About 50 J
Why: For a ring every piece moves at the rim speed, which is 0.35 times 20, or 7 m/s. So the spin energy is just one half times 2 times 49, which is 49 J. That is about the energy of lifting a 5 kg bag a metre — believable for something you can stop with your hand.
Fill the middle
Scaling questions are a favourite multiple-choice format. Work them from the formula, not from instinct.
Fill in the blanks
Doubling ω multiplies the spin energy by 4. Keeping the mass but doubling the radius of a disk multiplies I by 4, and so multiplies the spin energy at the same ω by 4.
Why: Energy goes as ω squared, so doubling ω gives four times the energy. I goes as R squared, so doubling R gives four times the moment of inertia, and energy is proportional to I at fixed ω — another factor of four. Both answers come from a square in a formula, which is why scaling questions are really questions about exponents.
Section
Two motions at once
Concept
A wheel that rolls without slipping moves its centre forward exactly one circumference for every turn. That single fact gives the link between the forward speed and the spin rate.
Figure (svg): A wheel rolling on the ground with velocity arrows at the top, the centre and the contact point, showing two v, v and zero
\[ v_{\text{centre}} = \omega R \]
The surprising consequence is at the bottom: the point touching the ground is not moving at all at that instant. The top moves at twice the speed of the centre. Both facts are examined regularly.
OpenStax, College Physics 2e — chapter 10, rotational motion and angular momentum chapter 10.3
Picture it
The cleanest way to see where the zero at the bottom comes from.
Figure (svg): Three wheels: one sliding with every point moving forward, one spinning in place with top and bottom moving opposite ways, and their sum, rolling, with two v at the top and zero at the bottom
Add the two motions point by point. At the top they agree and double; at the bottom they cancel. And because there are two motions, a rolling object has two kinetic energy terms — which is the next slide.
Anomaly
A car drives along at 30 m/s. Think about a single point on the tread of a tyre.
Predict first
At the instant that point is touching the road, how fast is it moving relative to the road?
Correct: Zero
Why: If the tyre does not skid, the patch touching the road is momentarily at rest against it — that is exactly what not skidding means. The tread is moving backwards at 30 m/s relative to the car while the car moves forwards at 30 m/s, and the two cancel. The tread at the top of the tyre is doing 60 m/s, which is why mud flies off the top of a wheel.
Concept
A rolling object has one kinetic energy term for its centre moving forward and one for its spin about the centre. The link from the last slide lets you write both in terms of the forward speed alone.
\[ K = \tfrac{1}{2}Mv^2 + \tfrac{1}{2}I\omega^2 \]
\[ K = \tfrac{1}{2}Mv^2 + \tfrac{1}{2}(kMR^2)\left(\tfrac{v}{R}\right)^2 = \tfrac{1}{2}(1+k)Mv^2 \]
The radius cancels. A rolling object behaves exactly like a sliding object whose mass has been increased by the factor one plus k. That single line is the key to every rolling problem in the unit.
HyperPhysics, Mechanics — rotational quantities and angular momentum rolling without slipping
Pattern
Commit the right-hand column to memory and rolling problems become one line of algebra.
| object | k | total K when rolling at v | share of K that is spin |
|---|---|---|---|
| sliding block, no spin | 0 | one half M v squared | none |
| solid sphere | 2/5 | 7/10 M v squared | 2/7, about 29% |
| solid disk or cylinder | 1/2 | 3/4 M v squared | 1/3, about 33% |
| hollow sphere | 2/3 | 5/6 M v squared | 2/5, 40% |
| ring or thin hoop | 1 | M v squared | 1/2, 50% |
Figure (svg): Horizontal bars for five objects split into a forward-motion share and a spinning share, from no spin for a sliding block to half and half for a ring
Read the last column as the price of rolling. Whatever fraction goes into spin is unavailable for forward speed.
College Board, AP Physics 1: Algebra-Based Course and Exam Description Unit 6, rotational kinetic energy
Worked example
A 2.0 kg solid sphere rolls without slipping along level ground at 3.0 m/s, then up a slope. How high does it climb before it stops?
Choose energy
Why: No collision, no grab, nothing changes shape — and rolling friction does no work. So mechanical energy is conserved.
Write the kinetic energy at the bottom, both terms
Why: The sphere has k of two fifths.
\[ K = \tfrac{1}{2}(2.0)(3.0)^2 + \tfrac{1}{2}\cdot\tfrac{2}{5}(2.0)(3.0)^2 = 9.0 + 3.6 = 12.6 \text{ J} \]
All of it becomes height
Why: At the top it has stopped moving and stopped spinning.
\[ h = \dfrac{12.6}{(2.0)(9.8)} = 0.643 \text{ m} \]
Figure (svg): Bars showing the forward and spinning shares of kinetic energy for rolling objects
Verify: with the seven-tenths shortcut
Why: For a sphere the total is seven tenths M v squared, which is 0.7 times 2.0 times 9.0, or 12.6 J — the same. And a block sliding without friction would reach only v squared over 2g, which is 0.459 m. The rolling ball climbs higher because its spin energy also turns into height.
OpenStax, College Physics 2e — chapter 10, rotational motion and angular momentum chapter 10.4
Check
Solve it on paper before you click.
Check your understanding
A solid cylinder rolls without slipping across the floor. What fraction of its total kinetic energy is rotational?
Answer: B
Why: With k equal to one half, the spin term is one half times the translational term. So the energy splits two parts forward to one part spin, and spin is one third of the total. In general the spin share is k divided by one plus k, which is one half over three halves.
Section
The most examined problem in the unit
Picture it
Five objects released together from the top of the same slope. Here is where each one is at the moment the frictionless block arrives at the bottom.
Figure (svg): Bars showing the fraction of the slope covered by a sliding block, a solid sphere, a solid disk, a hollow sphere and a ring at the moment the block finishes: 1.00, 0.71, 0.67, 0.60 and 0.50
The order is set entirely by k: the smaller the k, the faster the racer. And nothing about the mass or the radius appears, which is the result most people refuse to believe.
Worked example
Each object starts from rest and descends a vertical height of 1.0 m, rolling without slipping. Find its speed at the bottom, in general and then for each shape.
Energy: height becomes rolling kinetic energy
Why: Use the one-plus-k form from Part 3.
\[ Mgh = \tfrac{1}{2}(1+k)Mv^2 \;\Rightarrow\; v = \sqrt{\dfrac{2gh}{1+k}} \]
The mass cancels, and the radius never appeared
Why: So any solid sphere beats any solid disk, whatever their sizes.
\[ 2gh = 19.6 \text{ m}^2/\text{s}^2 \]
\[ v_{\text{sphere}} = \sqrt{19.6/1.4} = 3.74, \quad v_{\text{disk}} = \sqrt{19.6/1.5} = 3.61, \quad v_{\text{ring}} = \sqrt{19.6/2} = 3.13 \text{ m/s} \]
Figure (svg): Bars for the five racers showing how far down the slope each one is when the sliding block finishes
Verify: the limit k equals zero
Why: With no spin the formula becomes the square root of 2gh, which is 4.43 m/s — exactly the Unit 3 answer for a frictionless block. A general formula that reproduces a known special case is very unlikely to be wrong.
OpenStax, College Physics 2e — chapter 10, rotational motion and angular momentum chapter 10.4, rolling down an incline
Ranking
Same slope, all released from rest together, all rolling without slipping except the block, which slides without friction. Put them in finishing order, first to last.
Put in order
Why: Finishing order is the order of k from smallest to largest: block 0, solid sphere 0.4, solid disk 0.5, hollow sphere about 0.67, ring 1. The block wins because it spends nothing on spin. A useful memory hook is that the further out the mass sits, the more the object is a ring, and the slower it rolls.
Socratic
The result that feels wrong. Worth being able to defend.
Discussion prompt
A huge solid sphere and a marble race down the same slope. Why do they tie?
Hint: What happens to ω for a bigger ball moving at the same speed?
Answer:
Mass cancels for the same reason it does in free fall: the energy available, M g h, and the energy needed, one plus k times one half M v squared, both grow in proportion to M.
Radius cancels because a bigger ball spins more slowly at the same forward speed. Its I grows as R squared, but its ω falls as one over R, so the spin energy, which has ω squared in it, does not change.
So only the shape survives, through k. Two objects with the same shape tie, whatever their size, and that is a statement you can test on a kitchen table.
Counterexample
A claim people make with total confidence.
Discussion prompt
A bowling ball and a solid rubber ball of the same diameter are rolled down a ramp. Someone says the bowling ball will win easily because it is heavier. Find the flaw.
Hint: What is k for each ball?
Answer:
Both are solid spheres, so both have k equal to two fifths, and both reach the bottom at the square root of 2gh over 1.4. They tie.
The intuition comes from real ramps where the rubber ball loses a little to air drag and to squashing against the ramp. Those losses matter more for a light, soft ball than for a heavy, hard one.
A genuine counterexample to the race result would need two different shapes — and then it is the shape, not the mass, doing the work.
Edge cases
Rolling depends on friction. What if there is none?
Discussion prompt
A solid ball is released on a perfectly frictionless slope. Does it roll? Does it beat a ball released on a rough slope?
Hint: What exerts the torque that starts a ball spinning on a slope?
Answer:
With no friction there is nothing to exert a torque about the centre, so the ball cannot start spinning. It slides down without rotating, like a block.
So it arrives faster: the full square root of 2gh, since none of the energy goes into spin. The rough-slope ball arrives at only the square root of 2gh over 1.4.
In between, on a slope too steep for the friction available, the ball rolls and slips at once. Then kinetic friction does real work, some energy is lost as heat, and the clean energy equation no longer holds. AP problems tell you it rolls without slipping precisely to rule this case out.
Concept
A ball rolling down a slope needs static friction — without it, nothing would spin the ball up. And yet static friction does no work on a ball that rolls without slipping.
The reason is the contact point. Work is force times the distance the point of application moves, and the point where friction acts is momentarily at rest. Friction moves energy from forward motion into spin, without removing any of it.
Figure (svg): The rolling wheel with the contact point marked at rest, showing why friction there does no work
That is why the energy equation for rolling has no friction term. It is not that friction is absent — it is present and essential — but it only redirects energy, never removes it.
HyperPhysics, Mechanics — rotational quantities and angular momentum rolling and friction
Trap
A solid ball rolls without slipping down a ramp of height 1.0 m. Find its speed at the bottom.
Write mgh minus the friction work equals one half m v squared
Why: Friction acts on the ball, so it must take energy away — or so the reasoning goes.
Get stuck needing the coefficient of friction
Why: None is given, so the student invents one or gives up. Both are wrong, and the spin energy is missing too.
A solid ball rolls without slipping down a ramp of height 1.0 m. Find its speed at the bottom.
Rolling without slipping means friction does no work
Why: Its point of application is at rest. It moves energy into spin but removes none, so mechanical energy is conserved.
Put the missing energy into the spin term instead
Why: M g h equals one half times 1.4 times M v squared.
Solve
Why: v is the square root of 19.6 over 1.4, which is 3.74 m/s. The friction coefficient was never needed — which is the clue that the problem never intended you to use one.
Picture it
The case the race problems rule out, worth seeing once. A bowling ball is released skidding, with no spin.
Figure (svg): A graph of speed against time for a skidding bowling ball: the centre speed falls and the rim speed rises until they meet, after which the ball rolls at a constant speed
While it skids, kinetic friction does real work and energy is lost. The moment the centre speed equals ω R, it is rolling, friction stops acting, and the speed stays constant. For a solid sphere it always ends at five sevenths of the release speed.
Section
The force-times-distance of turning
Concept
A force pushing along the rim of a wheel does work exactly as in Unit 3: force times the distance it pushes through. The distance is now an arc, and the arc is the radius times the angle.
Figure (svg): A wheel with a tangential force at the rim pushing through an arc, showing that the work F times the arc length equals torque times the angle, with the power formula beside it
\[ W = \tau\,\Delta\theta \qquad P = \tau\,\omega \]
The angle must be in radians. Revolutions or degrees give a number that looks reasonable and is wrong by a factor of six or of fifty-seven, which is the single most common error in this section.
OpenStax, College Physics 2e — chapter 10, rotational motion and angular momentum chapter 10.4, work and energy revisited
Worked example
A constant torque of 12 N m acts on a wheel with I equal to 0.60 kg m squared, initially at rest, for 5.0 revolutions. Find the work done and the final angular speed.
Convert the angle to radians first
Why: One revolution is 2 pi radians.
\[ \Delta\theta = 5.0 \times 2\pi = 31.4 \text{ rad} \]
Work is torque times angle
Why: The torque is constant, so no graph or average is needed.
\[ W = (12)(31.4) = 377 \text{ J} \]
All the work becomes spin energy
Why: The wheel started at rest and only spins, so the work-energy theorem gives the final ω directly.
\[ 377 = \tfrac{1}{2}(0.60)\omega^2 \;\Rightarrow\; \omega = 35.4 \text{ rad/s} \]
Figure (svg): A tangential force pushing through an arc of a wheel, with the work and power formulas
Verify: with Unit 5 kinematics
Why: The angular acceleration is torque over I, which is 12 over 0.60, or 20 rad/s squared. Then ω squared equals 2 times 20 times 31.4, which is 1257, so ω is 35.4 rad/s. Energy and kinematics agree.
OpenStax, College Physics 2e — chapter 10, rotational motion and angular momentum chapter 10.4
Error analysis
Same wheel, same torque, same five revolutions. A student writes:
Annotate
On: \( W = \tau\,\Delta\theta = (12)(5.0) = 60 \text{ J} \)
Write the angle in radians on its own line before it goes into any formula. The same habit protects every equation in Units 5 and 6.
Estimation
Power is torque times angular speed. A car engine produces about 300 N m of torque at 3000 revolutions per minute.
Predict first
Roughly what power is that?
Correct: About 100 kW
Why: Three thousand revolutions per minute is 50 per second, and each is 2 pi radians, so ω is about 314 rad/s. Then 300 times 314 is about 94 000 W, or 94 kW — roughly 125 horsepower, which is a perfectly ordinary family car. Forgetting the 2 pi gives 15 kW, which is a small motorbike.
Worked example
A 2.0 kg block hangs from a string wrapped round a pulley that is a solid disk of mass 4.0 kg and radius 0.10 m. Released from rest, how fast is the block moving after falling 1.5 m?
Figure (svg): A block hanging from a string wrapped round a disk-shaped pulley on a fixed axle, with the masses, radius and fall distance listed
Energy: no collisions, the string does not slip
Why: Gravity's energy goes into the block's motion and the pulley's spin.
\[ mgh = \tfrac{1}{2}mv^2 + \tfrac{1}{2}\left(\tfrac{1}{2}MR^2\right)\left(\tfrac{v}{R}\right)^2 = \tfrac{1}{2}\left(m + \tfrac{M}{2}\right)v^2 \]
Notice the pulley acts like extra mass
Why: A disk pulley of mass M behaves like half its mass added to the moving block — and its radius cancels.
\[ (2.0)(9.8)(1.5) = 29.4 = \tfrac{1}{2}(2.0 + 2.0)v^2 \;\Rightarrow\; v = 3.83 \text{ m/s} \]
Verify: with forces and torque
Why: The acceleration is m g over m plus M over 2, which is 19.6 over 4.0, or 4.9 m/s squared. Then v squared equals 2 times 4.9 times 1.5, which is 14.7, giving 3.83 m/s. A massless pulley would have given 5.42 m/s, so the heavy pulley slows the block, as it must.
OpenStax, College Physics 2e — chapter 10, rotational motion and angular momentum chapter 10.4, example with a pulley
Missing information
A homework problem, reproduced exactly: a yo-yo of mass 0.10 kg is released from rest and falls 0.80 m as its string unwinds. Find its speed.
Discussion prompt
Why can this not be answered as stated, and what would you need?
Hint: Which two things does the spin term need that the problem never mentions?
Answer:
The energy equation needs the spin energy, which needs the moment of inertia and the link between v and ω. Neither is given.
The link uses the radius of the axle the string wraps round, not the outer radius. For a yo-yo the axle is tiny, so ω is huge and most of the energy goes into spin — which is why a yo-yo falls so slowly.
So you need the shape, the outer radius, and the axle radius. If the problem says to treat it as a uniform disk with the string on its rim, then k is one half and v is the square root of 2gh over 1.5, which is 3.23 m/s.
Section
The rotational version of mv
Concept
Use the dictionary from Part 2 on momentum and you get the rotational version: I times ω for a spinning body. A single particle moving past an axis has angular momentum too, even in a straight line.
\[ L = I\omega \qquad \text{(a rigid body spinning about an axis)} \]
\[ L = m v r_\perp \qquad \text{(a particle, about any chosen axis)} \]
The second formula uses the perpendicular distance from the axis to the line the particle moves along. Angular momentum has a direction too: on AP problems that means a sign, clockwise or counter-clockwise, chosen once and kept.
OpenStax, College Physics 2e — chapter 10, rotational motion and angular momentum chapter 10.5
Picture it
The idea that makes collisions with spinning things possible to solve.
Figure (svg): A ball moving in a straight horizontal line past an axis, with lines from the axis to the ball at three positions and the constant perpendicular distance of 0.30 metres marked
As the ball travels, the line from the axis to the ball changes length and angle, but the perpendicular distance stays fixed. So m v times that distance never changes — which is just what you would expect, since nothing is exerting a torque on the ball.
Socratic
This bothers most people the first time.
Discussion prompt
The ball in the picture is not going round anything. In what sense does it have angular momentum?
Hint: What would happen if the ball hit and stuck to a rod pinned at the axis?
Answer:
In the sense that it could start something turning. If it hits the end of a rod pivoted at that axis and sticks, the rod will spin — and how fast depends on exactly m v times the perpendicular distance.
Angular momentum is always measured about an axis you choose. Choose a different axis and you get a different value; choose an axis on the ball's line and it is zero.
That freedom is a tool. On a collision problem with a pivot, you choose the pivot as the axis, because the pivot's force then has no lever arm and drops out.
Worked example
A 0.50 kg ball moves at 4.0 m/s along a line that passes 0.30 m from an axis. Separately, the 20 kg flywheel from Part 2 spins at 50 rad/s. Find each angular momentum.
The ball: m v times the perpendicular distance
Why: The distance is to the line of motion, not to wherever the ball happens to be.
\[ L_{\text{ball}} = (0.50)(4.0)(0.30) = 0.60 \text{ kg}\,\text{m}^2/\text{s} \]
The flywheel: I times ω
Why: I was 0.90 kg m squared.
\[ L_{\text{wheel}} = (0.90)(50) = 45 \text{ kg}\,\text{m}^2/\text{s} \]
Figure (svg): The ball moving past the axis with its constant perpendicular distance marked
Verify: that the units match
Why: Kilograms times metres per second times metres gives kg m squared per second. And kg m squared times radians per second gives the same, since radians carry no unit. Two formulas, one quantity, the same units.
HyperPhysics, Mechanics — rotational quantities and angular momentum angular momentum
Concept
In Unit 4, a force acting for a time changed the momentum by force times time. The rotational version is identical: a torque acting for a time changes the angular momentum.
\[ \Delta L = \tau\,\Delta t \]
Figure (svg): A graph of torque against time showing a constant 75 newton metres for four seconds, with the shaded area equal to 300
When the torque varies, use the area under the torque-time graph. That is the exam's favourite way to present this idea, because it tests reading a graph and the physics at once.
College Board, AP Physics 1: Algebra-Based Course and Exam Description Unit 6, angular impulse
Worked example
A merry-go-round with I equal to 200 kg m squared is at rest. A parent pushes tangentially on its rim, 1.5 m from the centre, with a force of 50 N for 4.0 s. How fast is it turning afterwards?
The torque
Why: The push is tangential, so the lever arm is the full radius.
\[ \tau = (50)(1.5) = 75 \text{ N}\,\text{m} \]
Angular impulse is the change in L
Why: It starts at rest, so the final L is the impulse.
\[ \Delta L = (75)(4.0) = 300 = I\omega \;\Rightarrow\; \omega = \dfrac{300}{200} = 1.5 \text{ rad/s} \]
Figure (svg): The torque-time graph whose shaded area is 300
Verify: with angular acceleration
Why: Torque over I gives α equal to 75 over 200, or 0.375 rad/s squared. Over 4.0 s from rest that builds ω to 1.5 rad/s. Same answer, and the impulse route did not need α at all.
OpenStax, College Physics 2e — chapter 10, rotational motion and angular momentum chapter 10.5
Matching
The whole unit is this dictionary. Learn it and every formula is one you already know.
Match the pairs
Why: Every rotational formula in Units 5 and 6 is a straight-line formula with these substitutions. When you forget one, translate the straight-line version you remember — that is faster and safer than searching your notes.
Section
The heart of the unit
Concept
If the net outside torque on a system about an axis is zero, the angular momentum of the system about that axis stays the same. Forces inside the system can move angular momentum around between the parts, but they cannot change the total.
\[ \tau_{\text{ext}} = 0 \;\Rightarrow\; I_i\omega_i = I_f\omega_f \]
OpenStax, College Physics 2e — chapter 10, rotational motion and angular momentum chapter 10.5, conservation of angular momentum
Picture it
The standard example, and the one that most clearly separates angular momentum from energy.
Figure (svg): A skater spinning with arms outstretched, then with arms pulled in, spinning faster, with moment of inertia and spin rate labelled in each pose
Pulling the arms in moves mass toward the axis, so I falls. With no outside torque, I times ω has to stay the same, so ω rises in exact proportion.
Prediction
The skater pulls her arms in and spins two and a half times as fast. Angular momentum is unchanged.
Predict first
What happens to her rotational kinetic energy?
Correct: It increases
Why: Spin energy can be written as L squared over 2I. L is fixed and I has gone down, so the energy goes up — by the same factor of 2.5 that ω went up. The extra energy is the work her arm muscles did pulling her hands inward against their tendency to fly outward. Energy is not conserved here; angular momentum is.
Worked example
A skater has I equal to 3.0 kg m squared with arms out, spinning at 2.0 revolutions per second. She pulls her arms in, reducing I to 1.2 kg m squared. Find her new spin rate and the change in her kinetic energy.
Conserve angular momentum
Why: No outside torque about the vertical axis — the ice is nearly frictionless. Revolutions per second is fine here, because the units cancel in a ratio.
\[ (3.0)(2.0) = (1.2)\,\omega_f \;\Rightarrow\; \omega_f = 5.0 \text{ rev/s} \]
For energy, convert to radians per second
Why: Energy is not a ratio, so the units now matter.
\[ \omega_i = 4\pi = 12.6 \text{ rad/s}, \quad \omega_f = 10\pi = 31.4 \text{ rad/s} \]
\[ K_i = \tfrac{1}{2}(3.0)(12.6)^2 = 237 \text{ J}, \quad K_f = \tfrac{1}{2}(1.2)(31.4)^2 = 592 \text{ J} \]
Figure (svg): The skater with arms out and arms in, with I and omega labelled
Verify: with the ratio
Why: With L fixed, the energy scales as one over I, so it should rise by 3.0 over 1.2, which is 2.5. And 237 times 2.5 is 592 J. The 355 J gained is the work done by her arms.
OpenStax, College Physics 2e — chapter 10, rotational motion and angular momentum chapter 10.5, example of a spinning skater
Two truths and a lie
Arms out, then arms in, on frictionless ice.
Eliminate the wrong options
Cross out the false statement.
Survives elimination: s3
Why: Kinetic energy rises, by the same factor as ω. Pulling the arms in takes muscular work, and that work appears as extra spin energy. Conservation of angular momentum says nothing at all about energy — the two are separate laws with separate conditions, and this example is the clearest place they disagree.
Worked example
A merry-go-round is a 100 kg disk of radius 2.0 m, at rest. A 25 kg child runs at 4.0 m/s along a line tangent to the rim and jumps on at the edge. How fast does the platform turn, and how much kinetic energy is lost?
Figure (svg): Top view of a disk platform with a child running along a line that grazes its rim, with the before and after angular momentum calculation beside it
Choose angular momentum about the axle
Why: The jump is a grab. The axle exerts a force during it, but that force has no lever arm about the axle.
\[ I_{\text{disk}} = \tfrac{1}{2}(100)(2.0)^2 = 200, \qquad L_i = mvR = (25)(4.0)(2.0) = 200 \]
\[ I_f = 200 + (25)(2.0)^2 = 300 \;\Rightarrow\; \omega = \dfrac{200}{300} = 0.667 \text{ rad/s} \]
Compare the kinetic energies
Why: Before, only the child moves; after, everything turns together.
\[ K_i = \tfrac{1}{2}(25)(4.0)^2 = 200 \text{ J}, \qquad K_f = \tfrac{1}{2}(300)(0.667)^2 = 66.7 \text{ J} \]
Verify: with L squared over 2I
Why: 200 squared over 2 times 300 is 40 000 over 600, which is 66.7 J. Two-thirds of the energy, 133 J, went into the child's legs and the platform's flex — exactly as in a perfectly inelastic collision in Unit 4.
OpenStax, College Physics 2e — chapter 10, rotational motion and angular momentum chapter 10.6, collisions of extended bodies
Worked example
A uniform rod, 1.2 kg and 0.80 m long, lies on a frictionless table, pinned at one end. A 0.20 kg lump of putty slides at 6.0 m/s perpendicular to the rod, hits the free end and sticks. Find the rod's angular speed.
Figure (svg): Top view of a rod pinned at one end on a table, with putty approaching its free end perpendicular to it
Choose angular momentum about the pin
Why: The pin pushes during the hit, so linear momentum is ruined; about the pin, its force has no lever arm.
\[ L_i = mvL = (0.20)(6.0)(0.80) = 0.96 \]
Moment of inertia after: rod about its end, plus the putty at the end
Why: A rod about one end has I equal to one third M L squared.
\[ I_f = \tfrac{1}{3}(1.2)(0.80)^2 + (0.20)(0.80)^2 = 0.256 + 0.128 = 0.384 \]
\[ \omega = \dfrac{0.96}{0.384} = 2.5 \text{ rad/s} \]
Verify: the energy, which should drop
Why: Before: one half times 0.20 times 36, which is 3.6 J. After: 0.96 squared over 2 times 0.384, which is 1.2 J. Energy fell, as it must in a sticking collision. Had it risen, a sign or an I would be wrong.
HyperPhysics, Mechanics — rotational quantities and angular momentum angular momentum conservation
Trap
Same rod, same putty. Find how fast the free end moves just after the hit.
Conserve linear momentum: putty momentum before equals everything's momentum after
Why: 0.20 times 6.0 is 1.2, set equal to 1.4 times some speed.
Get a speed of about 0.86 m/s for the end
Why: It looks reasonable, which is the danger. It is wrong by more than a factor of two.
Same rod, same putty. Find how fast the free end moves just after the hit.
Notice the pin
Why: During the hit the pin pushes on the rod, an outside force, so linear momentum is not conserved. It is the most common wrong choice in the unit.
Conserve angular momentum about the pin instead
Why: That gives ω equal to 2.5 rad/s, as on the previous slide.
Convert to the end's speed
Why: The end moves at ω times L, which is 2.5 times 0.80, or 2.0 m/s. Checking: the system's linear momentum afterwards is 1.6, not 1.2 — the pin added the difference.
Picture it
Two disks on one axle, pressed together. The rotational version of two carts sticking together.
Figure (svg): A spinning disk and a disk at rest on the same axle combine into one disk turning more slowly, with moments of inertia and angular speeds labelled
Angular momentum is shared, and kinetic energy is lost to the friction between the plates. It is the exact rotational twin of a perfectly inelastic collision.
Elimination
Disk A, I equal to 0.40 kg m squared, spins at 30 rad/s. Disk B, I equal to 0.20, is at rest. They are pressed together.
Eliminate the wrong options
Which final angular speed is correct?
Survives elimination: c1
Why: Angular momentum before is 0.40 times 30, which is 12. After, the combined I is 0.60, so ω is 12 over 0.60, which is 20 rad/s. The kinetic energy drops from 180 J to 120 J, and the lost 60 J heats the clutch plates — which is why clutches wear out.
Sorting
Step two of the method, isolated. For each situation, choose the conservation law you would use to solve it.
Sort into buckets
Sort each situation by the quantity you conserve.
Notice that gravity is the dividing line in the second bucket: it exerts a torque about the pivot, so angular momentum is not conserved while something swings or falls.
Discrimination
Angular momentum is conserved in every one of these. Decide what happens to the kinetic energy.
Sort into buckets
What happens to the total kinetic energy?
Comparison
Fill the blank from the pattern. Everything in Unit 4 carries over.
Comparison matrix
| question | carts colliding on a track | a grab on a turning platform |
|---|---|---|
| what is conserved | linear momentum, m v | angular momentum, I ω |
| the condition | no net outside force | no net outside torque about the axis |
| objects stick together | perfectly inelastic, K lost | perfectly inelastic, K lost |
| the quantity that is added up | the masses | the moments of inertia |
The only real difference is the condition. A pinned axle or a pivot is an outside force that ruins linear momentum but leaves angular momentum about itself untouched.
Section
Angular momentum on the largest scale
Concept
The Sun's gravity on a planet always points straight at the Sun. A force pointing straight at the axis has no lever arm about it, so it exerts no torque about the Sun.
So a planet's angular momentum about the Sun stays the same all the way round its orbit — even though the planet's speed and distance both change.
\[ m v_p r_p = m v_a r_a \qquad \text{(at closest and farthest points)} \]
At the closest and farthest points the velocity is perpendicular to the line to the Sun, so the perpendicular distance is simply the distance. Closer means faster, in exact inverse proportion.
OpenStax, College Physics 2e — chapter 10, rotational motion and angular momentum chapter 6.6, satellites and Kepler's laws
Picture it
Kepler found this from observation in 1609, long before anyone knew why it was true.
Figure (svg): An elliptical orbit with the Sun at one focus and two shaded wedges of equal area, a short fat one near the Sun and a long thin one far away
The line from the Sun sweeps equal areas in equal times. Near the Sun the wedge is short, so the planet must move fast to sweep the same area; far away it moves slowly. The rate of sweeping area is proportional to L, which is why it never changes.
Worked example
The Earth is 1.47 times ten to the eleven metres from the Sun at its closest, in early January, where it moves at 30.3 km/s. At its farthest it is 1.52 times ten to the eleven metres. How fast is it moving then?
Conserve angular momentum about the Sun
Why: At both points the velocity is perpendicular to the line to the Sun, and the Earth's mass cancels.
\[ v_a = v_p\,\dfrac{r_p}{r_a} = (30.3)\dfrac{1.47}{1.52} = 29.3 \text{ km/s} \]
Interpret
Why: About 3% slower in July than in January. Northern summer happens when the Earth is farthest from the Sun, which is a reminder that seasons come from tilt, not distance.
Figure (svg): The elliptical orbit with equal-area wedges near and far from the Sun
Verify: against energy
Why: Farther from the Sun means higher gravitational energy, so the kinetic energy must be lower — the planet should be slower at the far point. It is, so the direction of the answer agrees with Unit 3 as well.
OpenStax, College Physics 2e — chapter 10, rotational motion and angular momentum chapter 6.6
Real world
Conservation of angular momentum is one of the most visible laws in everyday life, once you know to look.
Discussion prompt
Name three situations that are exactly the problems in this unit, and say which conservation law each one uses.
Hint: Think of a sport, a machine, and something in space.
Answer:
A diver pulls into a tuck to spin fast enough to finish a somersault, then opens out to slow the spin before entering the water. That is the skater, with the same muscle work feeding the extra spin energy.
A helicopter needs a tail rotor. When the main rotor is spun up, the body would otherwise spin the other way to keep the total angular momentum at zero.
When a massive star dies, its core, roughly the size of the Earth, collapses to about 20 km across. It keeps its angular momentum, so a slow spin becomes a neutron star turning many times a second.
Section
Consolidation
Pattern
Everything above, compressed to an index card. The left column is what you read in the problem; the right column is what you write first.
| the problem says | conserve | and watch out for |
|---|---|---|
| rolls without slipping down or up a slope | energy, with one plus k | friction does no work, so leave it out |
| a string unwinds from a pulley or a spool | energy, with the pulley's spin | link v and ω through the radius the string touches |
| sticks to, grabs, catches or jumps on | angular momentum about the pin | kinetic energy is lost |
| pulls in, tucks, extends, or changes shape | angular momentum | kinetic energy changes, from muscle work |
| a torque for a time, or a torque-time graph | angular impulse | use the area under the graph |
| a planet or satellite at its closest and farthest | angular momentum about the centre | closer means faster |
Figure (svg): A decision tree: collisions, grabs and changes of shape lead to angular momentum; smooth motion through a height or distance leads to energy with a spin term
College Board, AP Physics 1: Algebra-Based Course and Exam Description Unit 6
Check
Solve it on paper before you click.
Check your understanding
A ball of clay is thrown at an open door, perpendicular to it, and sticks near the edge. The door turns on its hinges. Which quantity of the clay-and-door system is the same just before and just after the hit?
Answer: C
Why: During the hit the hinges push on the door, an outside force, but that force acts on the hinge line and has no lever arm about it. So there is no outside torque about the hinges and angular momentum about that line is conserved. It is the putty-and-rod problem on a door.
Check
Solve it on paper before you click.
Check your understanding
A hollow cylinder and a solid cylinder of equal mass and radius roll without slipping down the same ramp from rest. At the bottom, which has more total kinetic energy?
Answer: C
Why: Both lost the same height and have the same mass, so both gained M g h of kinetic energy, and friction did no work on either. What differs is the split: the solid cylinder has more of it as forward motion, so it is faster, while the hollow one has more as spin. Same total, different shares — the race result and this result are the same fact.
Explain it
The test of whether today landed. Say it out loud, to a person or to an empty room.
Discussion prompt
In under a minute, explain how to decide whether a rotation problem wants energy or angular momentum.
Hint: Sudden event, or smooth motion?
Answer:
Look for a sudden event: a collision, a grab, a catch, or something changing shape. If there is one, angular momentum about the pivot or axle is conserved across it, and kinetic energy usually is not.
If the motion is smooth through a height or a distance, energy is conserved, as long as you include one half I ω squared for everything that spins and remember rolling friction does no work.
If a problem has both — a hit followed by a swing — split it at the moment of the hit and use one law on each side.
Explain it to yourself
If you can say this without notes, you have the most important distinction in the unit.
Discussion prompt
In two sentences: why does the skater speed up, and where does her extra energy come from?
Hint: Which quantity is fixed, and what changes it is not the same as what changes the other?
Answer:
Nothing outside exerts a torque on her, so I times ω stays fixed, and pulling her arms in lowers I, so ω has to rise.
Her kinetic energy rises as well, and the extra comes from the work her muscles do pulling her hands inward — angular momentum is conserved, energy is not.
Warm-up
Close the deck. Retrieval is worth several times what rereading is worth, and it shows you exactly what to revise.
Discussion prompt
From memory: the spin energy formula; k for a ring, a disk and a solid sphere; the rolling link; the order of the incline race; work done by a torque; the two formulas for angular momentum; when angular momentum is conserved; and what happens to a skater's kinetic energy when she pulls in.
Hint: One formula, three numbers, one link, one order, one product, two formulas, one condition, one direction.
Answer:
One half I ω squared.
1, one half, and two fifths.
v equals ω R, with the contact point at rest.
Smallest k first: block, solid sphere, disk, hollow sphere, ring — mass and radius do not matter.
Torque times the angle, in radians; power is torque times ω.
I ω for a spinning body, and m v times the perpendicular distance for a particle.
When the net outside torque about the axis is zero — through collisions too.
It increases, paid for by the work of her muscles.
Connect it up
Do this before the next session and bring it.
Draw it
On one side, draw the decision tree: sudden event or smooth motion, and which law each branch uses, with one example of each. On the other side, write the shape table with k for each shape, the one-plus-k rolling energy, and the linear-to-rotational dictionary. Add nothing else.
If the card fits, you understand the unit. Anything that will not fit is the part to work on next.
Exit ticket
Pick what would help most next time.
Predict first
What would be most useful?
Correct: Whichever you pick is what I will prepare.
Why: Problems that need both laws are the strongest choice once the decision tree is solid, because they test the exact skill — switching laws at the moment of the hit — that the free-response section rewards. Timed mixed practice is the best way to find out whether the decision has become automatic.
Recap
One decision, two laws. Everything in this unit is Units 3 and 4 with a spin term and a dictionary.
| straight line | rotation | conserved when |
|---|---|---|
| m | I = k M R squared | - |
| one half m v squared | one half I ω squared | nothing dissipates energy |
| m v | I ω, or m v times perpendicular distance | no net outside torque about the axis |
| F Δt | τ Δt | - |
| F d | τ Δθ, in radians | - |
College Board, AP Physics 1: Algebra-Based Course and Exam Description Unit 6 — with OpenStax chapter 10 for extra worked practice
Want this taught 1-on-1? Alexander tutors AP Physics 1 — $55/session, free consultation.