Unit 3: Work, Energy, and Power — The Bar Chart Toolkit

Unit 3 of the algebra-based course, organised around one repeatable energy attack built on the AP-style energy bar chart rather than around theory. It covers kinetic energy and why it grows with the square of speed, work from a force at an angle and as the area under a force-position graph, the work-energy theorem for speeds and stopping distances, gravitational and spring potential energy, conservative versus nonconservative forces, conservation of energy on drops, coasters, spring launchers and pendulums, the thermal energy friction produces, and power as work per second and force times velocity, closing with a one-step test for choosing energy or kinematics. No calculus is used anywhere.

Subject: AP Physics 1 · 70 slides · diagram-first lesson

Open the interactive version of this deck

What this lesson covers

The lesson, slide by slide

1. AP Physics 1 — Work, Energy, and Power

Title

Unit 3

A second toolkit for motion: bar charts, one equation, and no clock

2. What this unit gives you

Objectives

Unit 1 gave you kinematics, which needs constant acceleration and tracks motion moment by moment. This unit gives you a second tool that ignores everything in between and compares only a beginning with an end. Many problems that are hard with kinematics take two lines with energy.

  1. Run the same five-step energy attack on any problem, starting from a bar chart
  2. Calculate kinetic energy and explain why doubling the speed quadruples it
  3. Find the work done by a force at an angle, and give it the right sign
  4. Read work as the area under a force-position graph
  5. Use the work-energy theorem to get a speed or a distance without any time
  6. Calculate gravitational and spring potential energy, and say which forces have one
  7. Draw and read energy bar charts, including the thermal energy friction produces
  8. Calculate power as work per second and as force times velocity
  9. Decide in one step whether a problem wants energy or kinematics

College Board, AP Physics 1: Algebra-Based Course and Exam Description Unit 3, Work, Energy, and Power

3. Part 1 — The energy method

Section

Why a second tool

4. What energy can do that kinematics cannot

Concept

The kinematic equations need the acceleration to be constant. A ball rolling down a curved ramp, a block pushed by a spring, a car on a hilly road — none of those have constant acceleration, so the four equations simply do not apply.

Energy does not care. It compares one moment with another and ignores the path between them. The price is that energy has no time in it at all, so it can tell you how fast something is going but never when it gets there.

Kinematics
Moment by moment. Needs constant acceleration. Answers when and how far.
Energy
Start versus end only. Any path, any force that varies. Answers how fast and how high, never when.

OpenStax, College Physics 2e — chapter 7, Work, Energy, and Energy Resources chapter 7, introduction

5. The five steps

Picture it

Same idea as Unit 1: a fixed routine you run on every problem, especially the ones that look easy, so it is automatic before they get hard.

Figure (svg): A five-step vertical flow: choose the system, pick two moments, draw the bar chart, turn bars into formulas, solve and check

Step three is the heart of it. Once the bar chart is right, the equation is just the bars written in symbols, and the algebra is usually one line.

6. Predict: steep slide or gentle slide?

Prediction

Two frictionless playground slides start at the same height and end at the same height. One is short and steep; the other is long and gentle.

Predict first

A child starts from rest at the top of each. Which child is moving faster at the bottom?

  • The child on the steep slide
  • The child on the gentle slide
  • Both are moving at the same speed
  • It depends on the children's masses

Correct: Both are moving at the same speed

Why: Without friction, the only thing that changes the speed is how far each child has dropped, and both drop the same height. The steep slide gets them there sooner, but the final speed is identical. That is the whole power of energy: the shape of the path drops out of the problem entirely.

7. Part 2 — Kinetic energy

Section

The energy of motion

8. Kinetic energy: half m v squared

Concept

\[ K = \tfrac{1}{2}mv^2 \]

kinetic energy — the energy an object has because it is moving, measured in joules, where one joule is one kilogram metre squared per second squared

Two features matter for problems. First, it is a scalar: there is no direction and no sign, and it is never negative, because the speed is squared. Second, it grows with the square of the speed, not in proportion to it.

\[ 1200 \text{ kg at } 20 \text{ m/s}: \quad K = \tfrac{1}{2}(1200)(20)^2 = 240{,}000 \text{ J} \]

OpenStax, College Physics 2e — chapter 7, Work, Energy, and Energy Resources chapter 7.2

9. Why speed matters so much

Picture it

The graph of kinetic energy against speed is a parabola, not a straight line. That one shape explains most of road safety.

Figure (svg): A parabola of kinetic energy against speed for a 1200 kilogram car, marking 240 kilojoules at 20 metres per second and 960 kilojoules at 40

Going from 20 to 40 metres per second does not double the energy — it quadruples it. Whatever has to absorb that energy in a crash, or in the brakes, has four times the job.

10. Estimate: how much energy is a moving car?

Estimation

A 1200 kilogram car is travelling at 20 metres per second, about 45 miles per hour.

Predict first

Roughly how much kinetic energy does it have?

  • About 12 kJ
  • About 24 kJ
  • About 240 kJ
  • About 480 kJ

Correct: About 240 kJ

Why: Half of 1200 is 600, and 20 squared is 400, so the product is 240,000 joules. The tempting wrong answers come from forgetting to square the speed, which gives 12 kJ, or forgetting the half, which gives 480 kJ — the two most common slips in this whole unit.

11. Wager: double the speed

Commit first

Commit to an answer and a confidence before you look.

Predict first

A cyclist speeds up from 5 metres per second to 10 metres per second. By what factor does the kinetic energy increase?

  • Stays the same
  • Doubles
  • Triples
  • Quadruples

Correct: Quadruples

Why: Kinetic energy depends on speed squared, so doubling the speed multiplies it by two squared, which is four. If you wagered high on doubles, that is the most common intuition in this unit, and the square in the formula is exactly what it misses.

12. Part 3 — Work

Section

How energy gets in and out

13. Work: force times distance, along the motion

Concept

work — the energy a force transfers into or out of an object as the object moves; positive work adds energy, negative work removes it

\[ W = Fd\cos\theta \]

Here F is the size of the force, d is the size of the displacement, and theta is the angle between them. The cosine picks out only the part of the force that points along the motion — the part that actually pushes the object along its path.

Figure (svg): A sled pulled with a 50 newton rope at 30 degrees, split into a 43.3 newton horizontal component and a 25 newton vertical one, moving 10 metres

OpenStax, College Physics 2e — chapter 7, Work, Energy, and Energy Resources chapter 7.1

14. The sign of the work

Picture it

Before any arithmetic, decide whether a force adds energy, removes it, or does nothing.

Figure (svg): Three panels: a force along the motion doing positive work, a force at right angles doing zero work, and a force against the motion doing negative work

A force at right angles to the motion does no work at all, however large it is. That is why the normal force on a box sliding across a floor, and the string on a ball whirled in a circle, never change the speed.

15. Positive, negative or zero work?

Discrimination

Decide from the angle between force and motion, not from how hard anyone is trying.

Sort into buckets

What kind of work does the named force do?

positive
Gravity on a ball falling toward the ground; Your hand lifting a backpack onto a shelf
negative
Kinetic friction on a box sliding across the floor; Your hand lowering a backpack slowly to the floor
zero
The normal force on a box sliding across a level floor; The string on a ball whirled in a horizontal circle
pos
The force has a component along the motion: gravity points down while the ball moves down, and your hand pushes up while the backpack moves up. Energy is being added.
neg
The force points against the motion. Friction opposes sliding, and while lowering the backpack your hand pushes up while it moves down — you are taking energy out so it does not speed up.
zero
The force is at right angles to the motion the whole time, so the cosine is zero. The normal force is vertical while the box moves horizontally, and the string points to the centre while the ball moves along the circle.

16. Worked example: pulling a sled at an angle

Worked example

A child pulls a sled 10 metres across level snow with a rope that makes 30 degrees with the ground. The tension in the rope is 50 newtons. How much work does the rope do?

Figure (svg): The sled, the 50 newton rope at 30 degrees, its horizontal and vertical components, and the 10 metre displacement

Identify the force, the displacement and the angle between them

Why: The angle is measured between the rope and the direction the sled actually moves, which is along the ground.

\[ F = 50 \text{ N}, \quad d = 10 \text{ m}, \quad \theta = 30^\circ \]

Apply the definition

Why: Only the component along the motion counts, and the cosine supplies it.

\[ W = (50)(10)\cos 30^\circ = 433 \text{ J} \]

Verify: by the component route

Why: The horizontal component of the tension is 50 times cos 30, which is 43.3 newtons, and 43.3 newtons along a 10 metre displacement does 433 joules. The vertical 25 newtons does nothing, because the sled never rises.

OpenStax, College Physics 2e — chapter 7, Work, Energy, and Energy Resources chapter 7.1

17. When the force changes: work is an area

Concept

The formula needs a constant force. When the force changes as the object moves, plot force against position. The work is the area between the graph and the position axis — and in this course that area is always made of rectangles and triangles.

Figure (svg): A force-position graph at 20 newtons from 0 to 3 metres then falling to zero at 5 metres, with the area split into a 60 joule rectangle and a 20 joule triangle

\[ W = (20)(3) + \tfrac{1}{2}(2)(20) = 60 + 20 = 80 \text{ J} \]

Area below the axis counts as negative work. That is the graph's way of saying the force pointed backwards over that stretch.

College Board, AP Physics 1: Algebra-Based Course and Exam Description Unit 3, work from a force-position graph

18. Fill the middle: a spring's force graph

Fill the middle

A spring's force rises in a straight line from 0 newtons to 40 newtons as it is compressed 0.20 metres. The graph is a triangle.

Fill in the blanks

W = \tfrac4.0 J___(0.20)(40) = ___

Why: The area of a triangle is half the base times the height: half of 0.20 metres times 40 newtons is 4.0 joules. This triangle is exactly where the spring energy formula in Part 5 comes from, so it is worth seeing it once as an area before it becomes a formula.

19. Trap: forgetting the angle

Trap

The trap

A 100 newton force pulls a crate 5.0 metres across the floor, at 60 degrees above the horizontal. How much work does it do?

Multiply force by distance

Why: 100 times 5.0 gives 500 joules, written down at once.

Move on

Why: The answer is twice too big, because half of that force was pulling upward on a crate that never left the floor.

The fix

A 100 newton force pulls a crate 5.0 metres across the floor, at 60 degrees above the horizontal. How much work does it do?

Ask which part of the force points along the motion

Why: The motion is horizontal, so only the horizontal component works, and that is 100 times cos 60, which is 50 newtons.

Then multiply

Why: 50 newtons along 5.0 metres is 250 joules. Writing the cosine every time, even when the angle is zero, is what stops this mistake.

20. Part 4 — The work-energy theorem

Section

Work in, speed out

21. Net work equals the change in kinetic energy

Concept

\[ W_{\text{net}} = \Delta K = \tfrac{1}{2}mv_f^2 - \tfrac{1}{2}mv_i^2 \]

Add up the work done by every force on the object. If the total is positive, the object speeds up; if it is negative, it slows down; if it is zero, the speed does not change — even if individual forces are doing plenty of work.

This is Newton's second law with the time taken out. That is exactly why it is useful: it links force, distance and speed directly, and a problem that never mentions time is a strong hint to use it.

OpenStax, College Physics 2e — chapter 7, Work, Energy, and Energy Resources chapter 7.2

22. Worked example: a push from rest

Worked example

A net force of 10 newtons pushes a 2.0 kilogram box from rest across a frictionless floor for 5.0 metres. How fast is it moving at the end?

Figure (svg): A 2.0 kilogram box pushed from rest by a 10 newton net force over 5.0 metres, ending at 7.07 metres per second

Find the net work

Why: The net force points along the motion, so the angle is zero.

\[ W_{\text{net}} = (10)(5.0) = 50 \text{ J} \]

Set it equal to the change in kinetic energy

Why: It started from rest, so the initial kinetic energy is zero.

\[ 50 = \tfrac{1}{2}(2.0)v^2 - 0 \;\Rightarrow\; v^2 = 50 \]

\[ v = 7.07 \text{ m/s} \]

Verify: with kinematics

Why: Newton's second law gives an acceleration of 10 over 2.0, which is 5.0 metres per second squared. Then v squared equals 2 times 5.0 times 5.0, which is 50, and the square root is 7.07. Same answer, two independent routes.

OpenStax, College Physics 2e — chapter 7, Work, Energy, and Energy Resources chapter 7.2

23. Worked example: a braking distance

Worked example

A 1000 kilogram car travelling at 20 metres per second brakes. The road exerts a friction force of 8000 newtons on it. How far does the car travel before it stops?

Figure (svg): A parabola of stopping distance against initial speed for an 8 metre per second squared deceleration, marking 25 metres at 20 metres per second

Find the change in kinetic energy

Why: It ends at rest, so all of the kinetic energy has to be removed.

\[ \Delta K = 0 - \tfrac{1}{2}(1000)(20)^2 = -200{,}000 \text{ J} \]

Friction is the only force doing work, and it does negative work

Why: It points backwards while the car moves forwards, so the cosine is minus one.

\[ -(8000)d = -200{,}000 \;\Rightarrow\; d = 25 \text{ m} \]

Verify: with kinematics

Why: The deceleration is 8000 over 1000, which is 8.0 metres per second squared. The equation without time gives a distance of 20 squared over 2 times 8.0, which is 400 over 16, or 25 metres. Both routes agree.

HyperPhysics, Mechanics — work, energy and power work-energy principle

24. Why does stopping distance grow so fast?

Socratic

The graph beside the last example is a parabola, and the reason is one line of the theorem.

Discussion prompt

If the same car with the same brakes were going 40 metres per second instead of 20, how far would it take to stop, and why?

Hint: How does the kinetic energy change, and how much energy do the brakes remove per metre?

Answer:

100 metres — four times as far, not twice.

The brakes remove energy at a fixed rate per metre: 8000 joules for every metre of road. Doubling the speed quadruples the kinetic energy, so it takes four times as many metres to remove it all.

This is the same fact you met in Unit 1 through the equation without time. Energy just explains it in a sentence: the stopping distance is the kinetic energy divided by the braking force.

25. The pattern: work-energy in one table

Pattern

Apply this mechanically until the signs stop needing thought.

the situationnet workwhat happens to the speed
net force along the motionpositiveincreases
net force against the motionnegativedecreases
net force at right angles, or zerozerostays the same
pushed at constant speed against frictionzero: push and friction cancelstays the same
braking to a stopminus the starting kinetic energyfalls to zero

The fourth row is the one exams love. Individual forces can do lots of work while the net work is zero, so the speed never changes.

College Board, AP Physics 1: Algebra-Based Course and Exam Description Unit 3, work-energy theorem

26. Check: net work at constant speed

Check

Solve it on paper before you click.

Check your understanding

You push a crate 10 metres across a rough floor at constant speed. Your push is 50 newtons, horizontal. What is the net work done on the crate?

  • A. 500 J
  • B. Zero (correct)
  • C. Minus 500 J
  • D. 1000 J

Answer: B

Why: Constant speed means the kinetic energy does not change, so the net work must be zero. Your push does plus 500 joules and friction, which must also be 50 newtons to keep the speed constant, does minus 500 joules. The energy you put in goes into heating the floor and the crate, not into speed.

Why A tempts people
That is the work done by your push alone. The question asks for the net work, which adds in friction's negative contribution as well.
Why C tempts people
That is friction's work on its own. It is cancelled exactly by the positive work of the push.
Why D tempts people
Adding the two works as if both were positive ignores the fact that friction points backwards and removes energy.

27. Part 5 — Potential energy

Section

Energy stored by position

28. Gravitational potential energy: m g h

Concept

\[ U_g = mgh \]

Lifting an object at constant speed takes a force equal to its weight, mg, over a height h, so you do mgh of work. That energy is not lost; it is stored, and gravity gives it back as kinetic energy if the object falls.

Only changes in height matter. You choose where h equals zero — the floor, the table, the bottom of the hill — and the answer to any problem comes out the same, because only the difference between two heights ever appears in the equation.

Figure (svg): Three routes up to a 3.0 metre platform — a ladder, stairs and a long ramp — each giving the same gain in gravitational energy

OpenStax, College Physics 2e — chapter 7, Work, Energy, and Energy Resources chapter 7.3

29. Test the claim: the ramp takes less energy

Counterexample

A common belief, and it is half right, which is what makes it worth taking apart.

Discussion prompt

A mover says pushing a piano up a long ramp onto a truck takes less energy than lifting it straight up. Is that true?

Hint: Does gravity care about the route, or only the height?

Answer:

No — on a frictionless ramp the work done is exactly the same, mgh, because the piano gains the same height either way.

What the ramp reduces is the force. It needs a smaller push spread over a longer distance, and force times distance comes out the same. That trade is why ramps are useful, and it is the half of the belief that is right.

A real ramp has friction, which adds work, so in practice the ramp takes slightly more energy, not less. The mover is buying a smaller force with extra energy.

30. Spring potential energy: half k x squared

Concept

\[ F_s = kx \qquad U_s = \tfrac{1}{2}kx^2 \]

A spring pushes back with a force proportional to how far it is stretched or compressed from its natural length — Hooke's law. The spring constant k, in newtons per metre, says how stiff it is.

The stored energy is the area of the triangle under that straight-line force graph, which is where the half comes from. Like kinetic energy, it grows with the square, so compressing a spring twice as far stores four times the energy.

Figure (svg): A spring compressed a distance x against a wall, beside a triangular force-compression graph whose area is the stored energy

OpenStax, College Physics 2e — chapter 7, Work, Energy, and Energy Resources chapter 7.4

31. Fill the middle: a stiff spring

Faded example

A spring with k equal to 200 newtons per metre is compressed 0.10 metres, and then 0.20 metres.

Fill in the blanks

U_s = \tfrac1.0 J4.0 J(200)(0.10)^2 = ___, \qquad U_s = \tfrac______(200)(0.20)^2 = ___

Why: Half of 200 is 100, and 0.10 squared is 0.010, giving 1.0 joule. Doubling the compression to 0.20 squares to 0.040, giving 4.0 joules. Twice the compression, four times the energy, exactly as the square in the formula promises.

32. Which forces store energy?

Sorting

A force can have a potential energy only if the work it does depends on where you start and finish, not on the route.

Sort into buckets

Sort each force by whether it is conservative.

conservative — has a potential energy
Gravity; The force from an ideal spring
nonconservative — no potential energy
Kinetic friction; Air resistance; A push from your hand; Friction in a car's brakes
cons
The work depends only on the start and end positions, so it can be stored and given back in full. Lift a book and lower it again and gravity returns every joule; stretch a spring and release it and the spring does the same.
non
The work depends on the route, or the energy cannot be recovered. Friction and drag turn energy into heat on any path, and the longer the path the more they take; a push from your hand is energy from outside the system.

Only conservative forces get a bar of their own on an energy bar chart. Everything else appears as work crossing the system boundary, or as thermal energy.

33. Why friction gets no potential energy

Picture it

The test, drawn. Take an object from A to B by two different routes.

Figure (svg): Two routes between points A and B: gravity does the same work on both, friction does more work on the longer winding route

Gravity's work depends only on the drop from A to B, so a single number — the potential energy at each point — captures it. Friction's work depends on the length of the route, so no number attached to a position could ever describe it.

34. Part 6 — Conservation and bar charts

Section

The heart of the unit

35. Energy is conserved: the bar chart equation

Concept

\[ K_i + U_i + W_{\text{ext}} = K_f + U_f + \Delta E_{\text{th}} \]

Choose a system — usually the object plus the Earth, plus any spring. The energy inside it at the start, plus any work done on it from outside, equals the energy inside it at the end, plus any thermal energy friction has produced.

When nothing outside does work and there is no friction, the system is isolated and its mechanical energy — kinetic plus potential — stays constant. That special case solves a huge fraction of homework problems.

\[ K_i + U_i = K_f + U_f \]

College Board, AP Physics 1: Algebra-Based Course and Exam Description Unit 3, conservation of energy

36. Reading an energy bar chart

Picture it

This is the picture AP Physics 1 expects you to draw. Each bar is a block count of energy, so the total height on the left must match the total on the right.

Figure (svg): An energy bar chart for a dropped ball: four blocks of gravitational energy initially, no work, and four blocks of kinetic energy finally

Read it left to right as the equation: gravitational at the start, no work from outside, kinetic at the end. Writing mgh equals half m v squared is now just copying the bars.

37. Match the situation to its energy story

Matching

Every bar chart tells a story of where the energy started and where it ended up. Learn to read the story from the words.

Match the pairs

  • m1. A dropped ball just before it lands
  • m2. A spring-launched ball at the top of its flight
  • m3. A sled sliding to a stop on rough snow
  • m4. A box sliding down a rough ramp from rest
  • m5. A box pushed up a frictionless ramp at constant speed
  • m6. A bungee jumper at the lowest point
  • r1. gravitational becomes kinetic
  • r2. spring becomes gravitational
  • r3. kinetic becomes thermal
  • r4. gravitational becomes kinetic and thermal
  • r5. outside work becomes gravitational
  • r6. gravitational becomes spring energy in the cord

Why: Each phrase hides its bars. At rest means no kinetic bar; at the top of its flight means no kinetic bar for a vertical launch; rough means a thermal bar on the right; constant speed means the kinetic bar does not change, so the outside work went somewhere else. The bungee cord acts as a spring, so at the lowest point the jumper is momentarily at rest and all the energy sits in the stretched cord.

38. Worked example: a dropped ball

Worked example

A ball is dropped from rest 5.0 metres above the ground. Ignoring air resistance, how fast is it moving just before it lands?

Figure (svg): The bar chart for the drop: gravitational energy at the start becomes kinetic energy at the end

Write the bars as an equation

Why: Initial gravitational energy equals final kinetic energy; nothing else is on the chart.

\[ mgh = \tfrac{1}{2}mv^2 \]

Cancel the mass

Why: It appears in every term, so the answer cannot depend on it.

\[ v = \sqrt{2gh} = \sqrt{2(9.8)(5.0)} = \sqrt{98} = 9.90 \text{ m/s} \]

Verify: with kinematics

Why: The equation without time gives v squared equals 2 times 9.8 times 5.0, which is 98, the identical line. For a straight drop the two tools are literally the same calculation — energy only pulls ahead when the path stops being straight.

OpenStax, College Physics 2e — chapter 7, Work, Energy, and Energy Resources chapter 7.6

39. Worked example: a roller coaster

Worked example

A coaster car starts from rest at the top of a 20 metre hill. The track is frictionless. How fast is it moving at a later hump 8.0 metres high?

Figure (svg): A roller-coaster track profile starting at rest at 20 metres, reaching 19.8 metres per second at the bottom and 15.3 metres per second on an 8 metre hump, with a dashed total energy line

Choose the two moments

Why: The start and the 8.0 metre hump. Everything in between — the dip, the curves — is irrelevant to energy.

Write the bars as an equation

Why: At the start: gravitational only. At the hump: gravitational and kinetic.

\[ mg(20) = mg(8.0) + \tfrac{1}{2}mv^2 \]

Cancel the mass and solve

Why: Only the 12 metre drop between the two moments matters.

\[ v = \sqrt{2(9.8)(12)} = \sqrt{235.2} = 15.3 \text{ m/s} \]

Verify: against the lowest point

Why: At the bottom of the dip the drop is the full 20 metres, giving the square root of 392, which is 19.8 metres per second. The hump answer must be smaller, because the car has climbed back up and given some kinetic energy back to gravity — and 15.3 is smaller.

HyperPhysics, Mechanics — work, energy and power conservation of energy

40. The race that feels wrong

Anomaly

Two balls roll without friction between the same two points, starting at the same speed. Track A is straight and level. Track B dips down into a valley and climbs back up to the same height.

Predict first

Which ball reaches the far end first?

  • Ball A, because its path is shorter
  • Ball B, because it moves faster in the valley
  • They tie, because energy is conserved on both
  • Ball A, because ball B has to climb back up

Correct: Ball B, because it moves faster in the valley

Why: Both balls finish at the same speed, which is the part energy guarantees. But arrival time is not an energy question. In the valley ball B is always moving faster than ball A, so it covers the slightly longer path in less time. This is exactly the limit of energy: it gives speeds, never times.

41. Worked example: a spring launcher

Worked example

A toy launcher has a spring with k equal to 400 newtons per metre, compressed 0.15 metres. It fires a 0.10 kilogram ball straight up. How high above the release point does the ball rise?

Figure (svg): The bar chart for the launch: spring energy at the start becomes gravitational energy at the top of the flight

Find the energy stored in the spring

Why: This is the whole budget the ball has to spend on climbing.

\[ U_s = \tfrac{1}{2}(400)(0.15)^2 = 4.5 \text{ J} \]

All of it becomes gravitational energy at the top

Why: At the highest point of a vertical launch the ball is at rest, so there is no kinetic bar on the right.

\[ 4.5 = (0.10)(9.8)h \;\Rightarrow\; h = 4.59 \text{ m} \]

Verify: through the launch speed

Why: Setting 4.5 joules equal to half of 0.10 times v squared gives a launch speed of the square root of 90, which is 9.49 metres per second. Kinematics then gives a height of 90 over 19.6, which is 4.59 metres — the same answer by a different route.

OpenStax, College Physics 2e — chapter 7, Work, Energy, and Energy Resources chapter 7.4

42. Worked example: a pendulum

Worked example

A pendulum bob is pulled aside until it is 0.45 metres above its lowest point, then released from rest. How fast is it moving at the bottom of its swing?

Figure (svg): A pendulum released from rest 0.45 metres above its lowest point, reaching 2.97 metres per second at the bottom

Check what does work

Why: Gravity does, and it has a potential energy. The string pulls along the radius while the bob moves along the circle, so the string does no work and never appears on the chart.

Write the bars as an equation

Why: Gravitational at the release point, kinetic at the bottom.

\[ mgh = \tfrac{1}{2}mv^2 \;\Rightarrow\; v = \sqrt{2(9.8)(0.45)} = \sqrt{8.82} = 2.97 \text{ m/s} \]

Verify: that kinematics could not have done this

Why: The bob's acceleration changes in size and direction throughout the swing, so none of the four kinematic equations apply. The answer also matches the drop result for a ball falling 0.45 metres, which it must — only the drop height entered the calculation.

HyperPhysics, Mechanics — work, energy and power pendulum energy

43. Faded example: the bottom of the coaster

Faded example

Same coaster, same 20 metre start from rest, no friction. Now finish it yourself for the lowest point of the track, at zero height.

Fill in the blanks

v = \sqrt20})} = 19.8 m/s

Why: The drop from the start to the lowest point is the full 20 metres, so v is the square root of 392, which is 19.8 metres per second. Any point on the track at the same height gives the same speed, whatever the shape of the track between.

44. The energy forms, side by side

Comparison

Fill the blank from the pattern. This table is most of the formula sheet for the unit.

Comparison matrix

energyformula in wordscan it be negativezero when
kinetichalf m v squaredneverthe object is at rest
gravitationalm g hyes, below your zero levelat the height you chose as zero
springhalf k x squaredneverthe spring is at its natural length
thermal from frictionfriction force times sliding distancenever, it only growsnothing has slid

Gravitational energy is the only one that can be negative, and only because you chose where zero is. That freedom is a tool: put zero at the lowest point in the problem and every height becomes positive.

45. Check: the bar chart at the top

Check

Solve it on paper before you click.

Check your understanding

A ball is thrown straight up. The system is the ball and the Earth, with zero height at the hand. Which bar chart describes the moment of release, then the highest point?

  • A. Kinetic only, then gravitational only (correct)
  • B. Kinetic only, then kinetic and gravitational
  • C. Gravitational only, then kinetic only
  • D. Kinetic only, then nothing at all

Answer: A

Why: At release the ball is at zero height and moving, so all its energy is kinetic. At the highest point of a vertical throw it is momentarily at rest, so all of that energy has become gravitational. The total stays the same because nothing outside the system does work and there is no friction.

Why B tempts people
That would be true for a ball thrown at an angle, which is still moving sideways at the top. A ball thrown straight up has no velocity at all at the top.
Why C tempts people
That is the story of a dropped ball, the reverse of this one. Here the ball starts at the zero height, so it starts with no gravitational energy.
Why D tempts people
Energy does not vanish. Taking the Earth into the system means the energy has been stored as gravitational energy, ready to come back as the ball falls.

46. Part 7 — Friction and thermal energy

Section

Where the missing energy goes

47. Friction turns mechanical energy into thermal energy

Concept

\[ \Delta E_{\text{th}} = f_k d \]

Kinetic friction does not destroy energy; it converts mechanical energy into thermal energy — the surfaces warm up. The amount is the friction force times the distance slid, and it appears as its own bar on the right of the chart.

Include the surfaces in the system and the total energy is still conserved. Only the mechanical part — kinetic plus potential — goes down. That is the precise sense in which friction makes energy disappear: it moves it somewhere you can no longer use it.

OpenStax, College Physics 2e — chapter 7, Work, Energy, and Energy Resources chapter 7.5

48. Worked example: a rough ramp

Worked example

A 5.0 kilogram box slides from rest down a ramp 6.0 metres long, dropping 3.0 metres in height. It reaches the bottom at 6.0 metres per second. How much thermal energy was produced, and what was the friction force?

Figure (svg): The bar chart for the rough ramp: five blocks of gravitational energy become three blocks of kinetic and two blocks of thermal energy

Find the starting energy

Why: Gravitational only, since it starts at rest.

\[ mgh = (5.0)(9.8)(3.0) = 147 \text{ J} \]

Find the final kinetic energy

Why: This is what survived the trip.

\[ \tfrac{1}{2}mv^2 = \tfrac{1}{2}(5.0)(6.0)^2 = 90 \text{ J} \]

The difference is the thermal energy, and dividing by the distance gives the friction

Why: Friction acted over the full 6.0 metre slope.

\[ \Delta E_{\text{th}} = 147 - 90 = 57 \text{ J}, \qquad f_k = \dfrac{57}{6.0} = 9.5 \text{ N} \]

Verify: that the friction is believable

Why: The ramp rises 3.0 in 6.0, so it is at 30 degrees, and the normal force is 49 times cos 30, about 42.4 newtons. A friction of 9.5 newtons means a coefficient of about 0.22, which is normal for wood on wood. A coefficient above 1 would have meant an arithmetic error.

OpenStax, College Physics 2e — chapter 7, Work, Energy, and Energy Resources chapter 7.5

49. Worked example: a sled on level snow

Worked example

A 20 kilogram sled moving at 4.0 metres per second slides onto level snow, where the coefficient of kinetic friction is 0.20. How far does it slide before stopping?

Figure (svg): The bar chart for the sled: four blocks of kinetic energy become four blocks of thermal energy

Find the friction force

Why: On level ground the normal force equals the weight.

\[ f_k = \mu mg = (0.20)(20)(9.8) = 39.2 \text{ N} \]

Find the kinetic energy that must be removed

Why: It all goes to thermal energy, because the sled ends at rest.

\[ K = \tfrac{1}{2}(20)(4.0)^2 = 160 \text{ J} \]

Set the thermal energy equal to it

Why: Friction times distance must account for all 160 joules.

\[ 39.2\,d = 160 \;\Rightarrow\; d = 4.08 \text{ m} \]

Verify: with kinematics

Why: The deceleration is 39.2 over 20, which is 1.96 metres per second squared. The equation without time gives 4.0 squared over 2 times 1.96, which is 16 over 3.92, or 4.08 metres. Both routes agree.

OpenStax, College Physics 2e — chapter 7, Work, Energy, and Energy Resources chapter 7.5

50. Hypothesis: a heavier sled

Hypothesis

Same snow, same coefficient of friction, same starting speed of 4.0 metres per second — but now the sled carries a passenger and has twice the mass.

Predict first

How far does the heavier sled slide?

  • Half as far
  • The same distance
  • Twice as far
  • Four times as far

Correct: The same distance

Why: Doubling the mass doubles the kinetic energy, but it also doubles the normal force and so the friction force. Twice the energy removed at twice the rate per metre takes the same number of metres. Write it out and the mass cancels: the distance is v squared over 2 mu g, with no m in it.

51. Find the error in this homework solution

Error analysis

The rough-ramp problem again: a 5.0 kilogram box slides from rest down a ramp, dropping 3.0 metres. A student finds the speed at the bottom.

Annotate

On: \( mgh = \tfrac{1}{2}mv^2 \;\Rightarrow\; v = \sqrt{2(9.8)(3.0)} = 7.67 \text{ m/s} \)

  • The equation leaves out the thermal bar. The ramp is rough, so some of the gravitational energy goes into heating the surfaces, not into speed.
  • Without a friction force or a coefficient, the speed cannot actually be found — the student has quietly solved a different, frictionless problem.
  • The measured speed was 6.0 metres per second, well below 7.67. A frictionless answer is an upper limit on the real speed, never the real speed itself.

This is what the bar chart prevents. Drawing it forces you to ask whether there is a thermal bar, and once you have asked, you cannot forget it.

52. Part 8 — Power

Section

How fast the energy moves

53. Power is energy per second

Concept

\[ P = \dfrac{W}{\Delta t} = \dfrac{\Delta E}{\Delta t} \qquad P = Fv \]

power — the rate at which work is done or energy is transferred, measured in watts, where one watt is one joule per second

The second form follows from the first: work is force times distance, and distance per second is speed. It is the one to use when something moves at a steady speed against a steady force — a motor lifting a lift, or a car holding speed against drag.

For scale: one horsepower is 746 watts, and a fit person can sustain a few hundred watts for a few minutes.

OpenStax, College Physics 2e — chapter 7, Work, Energy, and Energy Resources chapter 7.7

54. Same work, different power

Picture it

Two people of the same mass climb the same flight of stairs. One runs, one walks.

Figure (svg): Bar charts showing equal work of 2744 joules for two climbers, but power of 549 watts for the one taking 5 seconds and 274 watts for the one taking 10

The work is identical, because it depends only on mass and height. The power is not, because it divides that work by the time. Running up the stairs does not take more energy, it takes the same energy faster.

55. Worked example: running up the stairs

Worked example

A 70 kilogram student runs up a flight of stairs 4.0 metres high in 5.0 seconds. What is their average power output?

Figure (svg): Equal work of 2744 joules for two climbers, with 549 watts for the 5 second climb

Find the work done against gravity

Why: At roughly constant speed, the work equals the gain in gravitational energy.

\[ W = mgh = (70)(9.8)(4.0) = 2744 \text{ J} \]

Divide by the time

Why: Power is work per second.

\[ P = \dfrac{2744}{5.0} = 549 \text{ W} \]

Verify: that the size is believable

Why: 549 watts is about 0.74 horsepower, which is a hard sprint for a person but well within reach for a few seconds. A result of 50 watts or 5000 watts would mean a slip — a person is neither a light bulb nor a motorbike.

OpenStax, College Physics 2e — chapter 7, Work, Energy, and Energy Resources chapter 7.7

56. Explore: power to lift at steady speed

Tweak it

A motor lifts a load straight up at constant speed, so the force it supplies equals the weight and P equals mg times v. Drag the mass to see how the power line steepens.

Parameter explorer

Change the mass. How does the power needed depend on the speed, and how does it depend on the mass?

\[ P = ({m})(9.8)\,v \text{ watts} \]

  • m — from 100 to 1500: mass lifted (kg)

57. Eliminate the impossible powers

Elimination

A 1500 kilogram car accelerates from rest to 25 metres per second in 10 seconds on level road. Ignore friction and drag.

Eliminate the wrong options

Which average power is correct?

  • c1. About 46.9 kW
  • c2. About 93.8 kW
  • c3. About 1.9 kW
  • c4. About 469 kW

Survives elimination: c1

Why: The kinetic energy gained is half of 1500 times 25 squared, which is 468,750 joules. Spread over 10 seconds, that is 46,875 watts, about 46.9 kilowatts or 63 horsepower — a sensible figure for an ordinary car.

58. Part 9 — Putting it on your homework

Section

Choosing the tool

59. Energy or kinematics?

Picture it

Most homework problems can be done more than one way, but one way is usually far shorter. This is how to tell in a few seconds.

Figure (svg): Two panels contrasting when to use energy — speed and height, curved paths, springs, friction over a distance, no time — with when to use kinematics — time, constant acceleration, direction, projectiles

If the problem asks how long, energy cannot help, because there is no time in any energy equation. If the path is curved or a spring is involved, kinematics cannot help, because the acceleration is not constant.

60. Which tool would you reach for first?

Discrimination

Pick the faster route, not the only possible one.

Sort into buckets

Energy or kinematics?

energy
The speed at the bottom of a curved water slide; How fast a spring launches a ball; The speed of a pendulum bob at the bottom of its swing
kinematics
How long a dropped phone takes to hit the floor; How long a car takes to brake to a stop; How far a ball lands from a table it rolled off
en
The question is about a speed, and the path is curved or a spring is involved, so the acceleration is not constant. Energy compares the start and the end and skips the impossible middle.
kin
The question asks for a time, or for a horizontal distance that depends on a time. Energy has no clock in it, so it cannot answer either, and the motion has constant acceleration anyway.

61. The whole unit as one page

Pattern

Everything above, compressed to what you would want on a single index card.

the phrase in the problemwhat it tells youthe bar or term it gives
starts from restno kinetic energy at the startno initial K bar
at the highest point of a vertical throwmomentarily at restno final K bar
frictionless or smoothno thermal energyno thermal bar
rough, or with frictionsome energy becomes thermala thermal bar, friction times distance
compressed or stretched springstored spring energyhalf k x squared
at constant speedkinetic energy unchangednet work is zero
how quickly, or in wattsa power questiondivide the energy by the time

Notice that almost every row is about which bars exist, not about the formulas. Getting the bars right is most of the problem.

College Board, AP Physics 1: Algebra-Based Course and Exam Description Unit 3

62. Check: a curved ramp

Check

Solve it on paper before you click.

Check your understanding

A skateboarder starts from rest at the top of a smooth curved ramp 3.2 metres high. Ignoring friction, how fast is the skateboarder moving at the bottom?

  • A. About 5.6 m/s
  • B. About 7.9 m/s (correct)
  • C. About 63 m/s
  • D. It cannot be found without the shape of the ramp

Answer: B

Why: Gravitational energy at the top becomes kinetic energy at the bottom, and the mass cancels. The speed is the square root of 2 times 9.8 times 3.2, which is the square root of 62.7, about 7.9 metres per second. The shape of the ramp never enters, which is exactly why energy is the right tool.

Why A tempts people
That is the square root of g times h, which comes from dropping the factor of 2 when solving half m v squared equals m g h.
Why C tempts people
That is 2 g h without the square root — the speed squared, not the speed. A skateboard at 63 metres per second would be faster than a motorway car.
Why D tempts people
This is precisely what energy does not need. Without friction only the drop in height matters, so the curve of the ramp is irrelevant.

63. Teach the bar chart method

Explain it

The real test of whether today landed. Say it out loud, to a person or to an empty room.

Discussion prompt

In under a minute, teach someone how to set up an energy problem with a bar chart.

Hint: System, two moments, bars, formulas.

Answer:

Choose the system — usually the object and the Earth, plus any spring — and pick a start moment and an end moment.

Draw bars for the energy at the start, any work done from outside, and the energy at the end, including a thermal bar if anything slides with friction. The two sides must have the same total.

Turn each bar into its formula — half m v squared, m g h, half k x squared, friction times distance — and the equation is written. Then solve for the one unknown.

64. Explain why the mass so often cancels

Explain it to yourself

If you can say this without notes, you understand why so many answers in this unit do not depend on mass.

Discussion prompt

In two sentences, why does a frictionless slide give the same final speed to a light child and a heavy adult?

Hint: Which energy terms have an m in them?

Answer:

Both the gravitational energy and the kinetic energy are proportional to the mass, so every term in the equation carries an m, and it divides out.

A heavier person has more energy to spend, but also needs proportionally more to reach each speed, so the two effects cancel exactly — the same reason a feather and a hammer fall together in a vacuum.

65. Where you will meet this outside the homework

Real world

The unit can feel like problems about boxes, but energy is how engineers think about almost everything that moves.

Discussion prompt

Name three real designs that are energy problems from this unit, and say which idea each one uses.

Hint: Think of brakes, the tallest hill, and a crash.

Answer:

Hybrid and electric cars use regenerative braking: instead of turning kinetic energy into heat in the brakes, the motor runs as a generator and stores it in the battery. Same bar chart, different final bar.

The first hill of a roller coaster is always the tallest, because without a motor the car can never climb higher than the height its gravitational energy came from — friction only lowers the ceiling.

Crumple zones make a car stop over a longer distance in a crash. The kinetic energy that must be removed is fixed, so a longer distance means a smaller force on the people inside.

66. Push it: when is mechanical energy not conserved?

Edge cases

Every model has a range of validity, and knowing where this one ends stops you using it where it fails.

Discussion prompt

In which situations does kinetic plus potential energy fail to stay constant, and what do you do then?

Hint: Ask what could add energy to the system, and what could turn it into something you cannot get back.

Answer:

Whenever friction or air resistance acts, mechanical energy falls and thermal energy rises. Add a thermal bar, and the total is conserved again.

Whenever something outside the system pushes or pulls — a person, a motor, a rope held by someone not in the system — energy crosses the boundary as work. Add a work bar.

And in collisions where objects stick together or deform, kinetic energy turns into heat and sound even with no friction at all. That is the bridge to the next unit, where momentum is conserved even when energy is not.

67. Retrieval: eight answers, no notes

Warm-up

Close the deck. This is worth several times what rereading is worth, and it tells you exactly what to revise.

Discussion prompt

From memory: the formula for kinetic energy; what doubling the speed does to it; the work done by a force at right angles to the motion; the work-energy theorem in words; the gravitational and spring energy formulas; the extra bar friction adds; the two formulas for power; and the one question that decides energy or kinematics.

Hint: One formula, one factor, one zero, one theorem, two formulas, one bar, two formulas, one question.

Answer:

Half m v squared.

Multiplies it by four.

Zero, because the cosine of 90 degrees is zero.

The net work done on an object equals the change in its kinetic energy.

m g h, and half k x squared.

A thermal energy bar, equal to the friction force times the distance slid.

Work divided by time, and force times velocity.

Does the problem involve time? If so, kinematics; if not, energy is usually faster.

68. Build your own index card

Connect it up

Do this before the next session and bring it. It is the single most useful thing you can make in this unit.

Draw it

On one side, write the conservation equation with every term, and beside it the formula for each kind of energy. On the other side, draw four bar charts from memory: a dropped ball, a spring launching a ball upward, a box sliding down a rough ramp, and a sled sliding to a stop. Add nothing else.

If you can draw those four charts without looking, you can set up almost every energy problem the course will give you.

69. Exit ticket: where should the next session go?

Exit ticket

We can spend the next hour wherever it helps most.

Predict first

What would be most useful next time?

  • More bar chart problems, especially ones with friction
  • Working through your actual homework as it is set
  • Mixed problems where I have to choose energy or kinematics
  • Getting ahead into momentum and collisions
  • A timed set of AP-style questions to see where I stand

Correct: Whichever you pick is what I will prepare.

Why: Mixed problems are usually the strongest choice once the bar chart is automatic, because choosing the tool is the skill exams test most and practise least. Momentum is the natural next unit, and it is built for exactly the collisions where energy alone runs out.

70. What you can do now

Recap

One unit, one method. Every problem here was the same bar chart with different bars.

quantityformula in wordsthe unit
kinetic energyhalf m v squaredjoule
workF d cos theta, or the area under F against xjoule
gravitational energym g hjoule
spring energyhalf k x squaredjoule
thermal energy from frictionfriction force times distance slidjoule
powerwork over time, or force times velocitywatt

College Board, AP Physics 1: Algebra-Based Course and Exam Description Unit 3 — with OpenStax chapter 7 for extra worked practice

Sources

  1. College Board, AP Physics 1: Algebra-Based Course and Exam Description
  2. OpenStax, College Physics 2e — chapter 7, Work, Energy, and Energy Resources
  3. HyperPhysics, Mechanics — work, energy and power

Want this taught 1-on-1? Alexander tutors AP Physics 1 — $55/session, free consultation.

Book on Wyzant · Text (657) 465-8108